Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

OWC

OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 1.2V 288pin

SKU CH-5FEF-TYW4N

32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for compatible Supermicro server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC registered design protects data integrity in servers
  • 32 GB capacity expands memory for demanding workloads
  • 2933 MHz DDR4 speed matches Supermicro X11 platform specs
  • 2 V operation reduces power draw per module
  • Compatible with five Supermicro X11 motherboard models

Server-grade DDR4 upgrade

This OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM targets administrators expanding Supermicro X11 motherboards such as X11DGQ, X11DPD-L, X11DPD-M25, X11DPFF-SN and X11DPFF-SNR. It replaces Supermicro part numbers including MEM-DR432LC-ER29 and MEMDR432LCL01ER29 for direct drop-in installation. The module is not suitable for standard desktop boards or consumer laptops.

Sustained error-corrected throughput

Registered buffering and ECC logic maintain data integrity across continuous workloads in servers, workstations and NAS systems. The 1.2V DDR4 modules operate at PC4-23400 speed while remaining backward compatible with 2133MHz, 2400MHz and 2666MHz bus clocks. Dual-rank 2Rx4 organisation distributes load evenly during long compute sessions.

Platform verification checklist

Confirm the motherboard is one of the listed Supermicro X11 models before ordering. Ensure all populated slots use registered ECC DIMMs; mixing with unbuffered memory is not supported. Verify the system BIOS recognises DDR4 2933MHz registered modules at 1.2V. Check available 288-pin slots for physical clearance.

Priekšrocības

  • ECC registered design protects data integrity in servers
  • 32 GB capacity expands memory for demanding workloads
  • 2933 MHz DDR4 speed matches Supermicro X11 platform specs
  • 2 V operation reduces power draw per module
  • Compatible with five Supermicro X11 motherboard models

Specifikācijas

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DGQ
Supermicro Motherboard X11DPD-L
Supermicro Motherboard X11DPD-M25
Supermicro Motherboard X11DPFF-SN
Supermicro Motherboard X11DPFF-SNR

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power does this 1.2V DDR4 2933MHz RDIMM draw when the server runs continuously?

Each module operates at 1.2V, the standard DDR4 voltage, so power draw stays within JEDEC limits for registered ECC DIMMs at this speed.

What must the motherboard support for this 2Rx4 registered ECC DIMM to function?

The board must accept 288-pin DDR4 registered ECC memory and run at 1.2V; it will not work with unbuffered or non-ECC slots.

Will this 32GB PC4-23400 module run stably beside older 2133MHz or 2400MHz DDR4 ECC RDIMMs?

Yes, it is backward compatible with 2133MHz, 2400MHz and 2666MHz registered ECC DIMMs; the system will clock all modules to the lowest common speed.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.