暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

OWC

OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM 2Rx4 1.2V 288pin

SKU CH-5FEF-TYW4N

32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for compatible Supermicro server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC registered design protects data integrity in servers
  • 32 GB capacity expands memory for demanding workloads
  • 2933 MHz DDR4 speed matches Supermicro X11 platform specs
  • 2 V operation reduces power draw per module
  • Compatible with five Supermicro X11 motherboard models

Server-grade DDR4 upgrade

This OWC 32GB DDR4 2933MHz CL21 ECC Registered RDIMM targets administrators expanding Supermicro X11 motherboards such as X11DGQ, X11DPD-L, X11DPD-M25, X11DPFF-SN and X11DPFF-SNR. It replaces Supermicro part numbers including MEM-DR432LC-ER29 and MEMDR432LCL01ER29 for direct drop-in installation. The module is not suitable for standard desktop boards or consumer laptops.

Sustained error-corrected throughput

Registered buffering and ECC logic maintain data integrity across continuous workloads in servers, workstations and NAS systems. The 1.2V DDR4 modules operate at PC4-23400 speed while remaining backward compatible with 2133MHz, 2400MHz and 2666MHz bus clocks. Dual-rank 2Rx4 organisation distributes load evenly during long compute sessions.

Platform verification checklist

Confirm the motherboard is one of the listed Supermicro X11 models before ordering. Ensure all populated slots use registered ECC DIMMs; mixing with unbuffered memory is not supported. Verify the system BIOS recognises DDR4 2933MHz registered modules at 1.2V. Check available 288-pin slots for physical clearance.

特長

  • ECC registered design protects data integrity in servers
  • 32 GB capacity expands memory for demanding workloads
  • 2933 MHz DDR4 speed matches Supermicro X11 platform specs
  • 2 V operation reduces power draw per module
  • Compatible with five Supermicro X11 motherboard models

仕様

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DGQ
Supermicro Motherboard X11DPD-L
Supermicro Motherboard X11DPD-M25
Supermicro Motherboard X11DPFF-SN
Supermicro Motherboard X11DPFF-SNR

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does this 1.2V DDR4 2933MHz RDIMM draw when the server runs continuously?

Each module operates at 1.2V, the standard DDR4 voltage, so power draw stays within JEDEC limits for registered ECC DIMMs at this speed.

What must the motherboard support for this 2Rx4 registered ECC DIMM to function?

The board must accept 288-pin DDR4 registered ECC memory and run at 1.2V; it will not work with unbuffered or non-ECC slots.

Will this 32GB PC4-23400 module run stably beside older 2133MHz or 2400MHz DDR4 ECC RDIMMs?

Yes, it is backward compatible with 2133MHz, 2400MHz and 2666MHz registered ECC DIMMs; the system will clock all modules to the lowest common speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。