OWC 128GB (4x32GB) DDR3 1600 ECC Registered RDIMM memory upgrade
- 128GB (4 x 32GB)
- 240-Pin DDR3 ECC RD…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
A 32 GB DDR5 SODIMM running at 4800 MHz with CL40 latency and 1.1 V operation for laptops and all-in-one systems
Capacity 32GB
This OWC module adds 32GB of DDR5 memory to a compatible laptop, all-in-one or NAS system. It uses the 262-pin SO-DIMM form factor and runs at the JEDEC-standard 4800 MT/s with CL40 latency. The 1.1V operating voltage matches the DDR5 baseline specification.
Systems that accept a single 32GB DDR5 SO-DIMM will gain the full capacity increase from this module. Machines that require ECC, registered DIMMs, or a different pin count cannot use this part. Buyers needing more than 32GB in a single slot should look at higher-density modules.
The 2Rx8 organisation delivers the full 32GB capacity within a single 262-pin module. This density decides whether the upgrade fits the platform's maximum per-slot limit.
| Brand | OWC |
|---|---|
| Part Number | 4S8D52R832GB |
| Capacity | 32GB |
| Type | 262-Pin DDR5 SO-DIMM |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits laptops and all-in-one systems that have a DDR5 SO-DIMM slot. Check your device manual to confirm it supports DDR5 memory.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are required for the memory itself. The module runs at 1.1V without a heat spreader, so ensure your laptop's internal airflow remains clear; no extra cooling pads are needed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?