OWC 128GB (4x32GB) DDR3 1600 ECC Registered RDIMM memory upgrade
- 128GB (4 x 32GB)
- 240-Pin DDR3 ECC RD…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
OWC
A 32 GB DDR5 SODIMM running at 4800 MHz with CL40 latency and 1.1 V operation for laptops and all-in-one systems
Capacity 32GB
This OWC module adds 32GB of DDR5 memory to a compatible laptop, all-in-one or NAS system. It uses the 262-pin SO-DIMM form factor and runs at the JEDEC-standard 4800 MT/s with CL40 latency. The 1.1V operating voltage matches the DDR5 baseline specification.
Systems that accept a single 32GB DDR5 SO-DIMM will gain the full capacity increase from this module. Machines that require ECC, registered DIMMs, or a different pin count cannot use this part. Buyers needing more than 32GB in a single slot should look at higher-density modules.
The 2Rx8 organisation delivers the full 32GB capacity within a single 262-pin module. This density decides whether the upgrade fits the platform's maximum per-slot limit.
| Brand | OWC |
|---|---|
| Part Number | 4S8D52R832GB |
| Capacity | 32GB |
| Type | 262-Pin DDR5 SO-DIMM |
| CAS Latency | CL40 |
| Voltage | 1.1V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Laptops, All-in-One Systems, and NAS Systems |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits laptops and all-in-one systems that have a DDR5 SO-DIMM slot. Check your device manual to confirm it supports DDR5 memory.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are required for the memory itself. The module runs at 1.1V without a heat spreader, so ensure your laptop's internal airflow remains clear; no extra cooling pads are needed.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?