Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black DDR2 desktop memory modules without heat spreaders

OWC

OWC 4GB (2x2GB) DDR2 800 PC2-6400 CL6 1.8V UDIMM Desktop RAM

SKU CH-E237-CSFT8

A dual-channel kit of two unbuffered DDR2 800 modules totalling 4 GB at CL6 latency and 1.8 V for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Voltage1.8V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

  • Dual-channel kit adds 4 GB capacity for smoother multitasking
  • DDR2 800 speed with CL6 latency improves data throughput
  • 8 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC modules install without extra configuration
  • 100 % ROHS-compliant build tested to meet OEM specifications

DDR2 800 dual-channel kit

This OWC kit delivers four gigabytes of DDR2 800 memory in two matched 2GB modules. It targets owners of legacy desktops that require PC2-6400 unbuffered DIMMs for a straightforward capacity boost.

240-pin unbuffered DIMMs

Each stick uses the standard 240-pin UDIMM form factor without a heat spreader, keeping the profile low for tight motherboard layouts. The black PCB fits directly into existing slots, and the JEDEC-compliant 1.8V operation ensures broad compatibility with older platforms.

CL6 latency at 1.8V

The modules run at CAS latency 6 while maintaining the standard DDR2 voltage of 1.8V, a combination that determines whether the kit will post stably on a given board. Matching these two figures to the system's requirements is the single check that confirms a successful upgrade.

Priekšrocības

  • Dual-channel kit adds 4 GB capacity for smoother multitasking
  • DDR2 800 speed with CL6 latency improves data throughput
  • 8 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC modules install without extra configuration
  • 100 % ROHS-compliant build tested to meet OEM specifications

Specifikācijas

BrandOWC
Part Number6U4D22R8004P
Capacity4GB (2 x 2GB)
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What speed does the DDR2 800 PC2-6400 rating cap the modules at in practice?

The kit runs at DDR2 800 with a PC2-6400 bandwidth ceiling and CL6 latency, so the memory controller will not push data faster than that specification allows.

What physical slot and pin count do these 240-pin UDIMMs need to fit?

Each module is a 240-pin unbuffered DIMM, so it requires a standard desktop DDR2 DIMM slot with the matching key notch; the black PCB has no heat spreader to clear oversized CPU coolers.

How are the two sticks installed for dual-channel operation, and what step do people often miss?

Insert one stick into each matched-colour slot pair, press down until both side clips click, then verify the BIOS reports 4 GB in dual-channel mode — skipping the second slot or mixing channels is the common error.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.