Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black DDR2 desktop memory modules without heat spreaders

OWC

OWC 4GB (2x2GB) DDR2 800 PC2-6400 CL6 1.8V UDIMM Desktop RAM

SKU CH-E237-CSFT8

A dual-channel kit of two unbuffered DDR2 800 modules totalling 4 GB at CL6 latency and 1.8 V for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Voltage1.8V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

  • Dual-channel kit adds 4 GB capacity for smoother multitasking
  • DDR2 800 speed with CL6 latency improves data throughput
  • 8 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC modules install without extra configuration
  • 100 % ROHS-compliant build tested to meet OEM specifications

DDR2 800 dual-channel kit

This OWC kit delivers four gigabytes of DDR2 800 memory in two matched 2GB modules. It targets owners of legacy desktops that require PC2-6400 unbuffered DIMMs for a straightforward capacity boost.

240-pin unbuffered DIMMs

Each stick uses the standard 240-pin UDIMM form factor without a heat spreader, keeping the profile low for tight motherboard layouts. The black PCB fits directly into existing slots, and the JEDEC-compliant 1.8V operation ensures broad compatibility with older platforms.

CL6 latency at 1.8V

The modules run at CAS latency 6 while maintaining the standard DDR2 voltage of 1.8V, a combination that determines whether the kit will post stably on a given board. Matching these two figures to the system's requirements is the single check that confirms a successful upgrade.

Pluspunten

  • Dual-channel kit adds 4 GB capacity for smoother multitasking
  • DDR2 800 speed with CL6 latency improves data throughput
  • 8 V JEDEC-standard voltage ensures broad desktop compatibility
  • 240-pin unbuffered non-ECC modules install without extra configuration
  • 100 % ROHS-compliant build tested to meet OEM specifications

Specificaties

BrandOWC
Part Number6U4D22R8004P
Capacity4GB (2 x 2GB)
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Andere versies van dit model

Nog 1 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What speed does the DDR2 800 PC2-6400 rating cap the modules at in practice?

The kit runs at DDR2 800 with a PC2-6400 bandwidth ceiling and CL6 latency, so the memory controller will not push data faster than that specification allows.

What physical slot and pin count do these 240-pin UDIMMs need to fit?

Each module is a 240-pin unbuffered DIMM, so it requires a standard desktop DDR2 DIMM slot with the matching key notch; the black PCB has no heat spreader to clear oversized CPU coolers.

How are the two sticks installed for dual-channel operation, and what step do people often miss?

Insert one stick into each matched-colour slot pair, press down until both side clips click, then verify the BIOS reports 4 GB in dual-channel mode — skipping the second slot or mixing channels is the common error.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.