Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold edge contacts and black memory chips

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 2Rx8 204-pin 1.5V Non-ECC SODIMM for Dell Studio 1457 1557 1558 1747 XPS 1645

SKU CH-53HV-SD12D

A 4 GB DDR3 SODIMM running at 1333 MHz CL9 for Dell Studio 1457, 1557, 1558, 1747 and XPS 1645 laptops

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boosts multitasking with a 4GB DDR3 1333MHz module
  • Fits Dell Studio 1457 1557 1558 1747 and XPS 1645
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Simple DIY install using the 204-pin SODIMM form factor
  • Runs at 1.5V CL9 for stable low-voltage operation

Dell Studio and XPS laptop memory upgrade

This 4GB DDR3 SODIMM is built for Dell Studio 1457, 1557, 1558, 1747 and XPS 1645 notebooks. It delivers a straightforward capacity increase for owners of those specific models who need more memory for everyday multitasking. The module follows the exact electrical and physical layout required by those systems.

Thermals and power in normal use

The module runs at a standard 1.5V without a heat spreader, relying on the laptop's internal airflow. As an unbuffered non-ECC stick it draws minimal power and adds no audible noise during typical workloads. Operation stays within JEDEC limits for the platform.

The specification that decides fit

The 204-pin DDR3 1333 PC3-10600 CL9 2Rx8 form factor is the single detail that determines compatibility. Only systems designed for this exact pin count, voltage and timing will accept the module. Buyers with other DDR generations or different pin layouts cannot use it.

Priekšrocības

  • Boosts multitasking with a 4GB DDR3 1333MHz module
  • Fits Dell Studio 1457 1557 1558 1747 and XPS 1645
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Simple DIY install using the 204-pin SODIMM form factor
  • Runs at 1.5V CL9 for stable low-voltage operation

Specifikācijas

BrandOWC
Part Number1S3D32R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell Studio 1457
Dell Studio 1557
Dell Studio 1558
Dell Studio 1747
Dell Studio XPS 1645

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install this 204-pin SODIMM in my Dell Studio 1558?

Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, insert firmly until the gold contacts are no longer visible, then press down until the side clips click into place.

Will this PC3-10600 module need any firmware updates or periodic replacement?

No firmware updates are required for this JEDEC-standard DDR3 memory, and solid-state DRAM has no moving parts or scheduled replacement interval under normal use.

What is the first limitation I will hit when running this CL9 1.5V kit at full load for long periods?

The module operates at the standard 1.5V without a heat spreader, so sustained heavy workloads may hit thermal throttling limits before bandwidth or latency ceilings are reached.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.