Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 4GB DDR3 1600 CL11 1.5V 204-pin SODIMM HP Envy 6 memory upgrade

SKU CH-MVE4-6FW92

A 4 GB DDR3 SODIMM running at 1600 MHz with CL11 latency and 1.5 V for HP Envy 6 laptops

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost system responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard 1.5V design ensures a warranty-safe upgrade for HP Envy 6
  • Single 1Rx8 rank 204-pin SODIMM installs easily in compatible laptops
  • PC3-12800 speed rating matches factory specifications for reliable operation
  • Non-ECC unbuffered memory tested to meet or exceed OEM requirements

OWC 4GB DDR3 SODIMM for HP Envy 6

This OWC module is a 4 GB DDR3 SODIMM built to upgrade compatible HP Envy 6 series laptops. It runs at 1600 MHz with CL11 latency at 1.5 V. The part number is 1S6D31R804GB and it uses a 204-pin unbuffered non-ECC design.

Suits owners of DDR3 Envy 6 models needing

This upgrade fits HP Envy 6 notebooks that use DDR3 memory and have an available SODIMM slot. Buyers whose Envy 6 requires a different memory generation cannot use this module. Systems already at maximum capacity or with no free slot will not benefit.

204-pin DDR3 SODIMM form factor decides fit

The module uses the 204-pin DDR3 SODIMM form factor required by compatible HP Envy 6 laptops. Only systems designed for this exact pin count and DDR3 electrical specification will accept the part. Verify the service manual before ordering.

Priekšrocības

  • Boost system responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard 1.5V design ensures a warranty-safe upgrade for HP Envy 6
  • Single 1Rx8 rank 204-pin SODIMM installs easily in compatible laptops
  • PC3-12800 speed rating matches factory specifications for reliable operation
  • Non-ECC unbuffered memory tested to meet or exceed OEM requirements

Specifikācijas

BrandOWC
Part Number1S6D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 6 Series using DDR3 Memory

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What does the 1600 MHz speed mean once the module is installed in an HP Envy 6?

The module runs at 1600 MHz DDR3; actual data rate depends on the laptop's memory controller and whether one or two slots are populated.

What does the PC3-12800 label tell me about the interface and its practical limit?

PC3-12800 is the JEDEC DDR3-1600 standard; the laptop's chipset caps the usable bandwidth.

What physical slot and notch does this 204-pin SODIMM need to fit?

It requires a standard 204-pin DDR3 SODIMM socket with the key notch in the DDR3 position.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.