Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular circuit board with gold edge connectors and black memory chips

OWC

OWC 4GB DDR3 1600 CL11 1.5V 204-pin SODIMM HP Envy 6 memory upgrade

SKU CH-MVE4-6FW92

A 4 GB DDR3 SODIMM running at 1600 MHz with CL11 latency and 1.5 V for HP Envy 6 laptops

  • Capacity4GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Boost system responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard 1.5V design ensures a warranty-safe upgrade for HP Envy 6
  • Single 1Rx8 rank 204-pin SODIMM installs easily in compatible laptops
  • PC3-12800 speed rating matches factory specifications for reliable operation
  • Non-ECC unbuffered memory tested to meet or exceed OEM requirements

OWC 4GB DDR3 SODIMM for HP Envy 6

This OWC module is a 4 GB DDR3 SODIMM built to upgrade compatible HP Envy 6 series laptops. It runs at 1600 MHz with CL11 latency at 1.5 V. The part number is 1S6D31R804GB and it uses a 204-pin unbuffered non-ECC design.

Suits owners of DDR3 Envy 6 models needing

This upgrade fits HP Envy 6 notebooks that use DDR3 memory and have an available SODIMM slot. Buyers whose Envy 6 requires a different memory generation cannot use this module. Systems already at maximum capacity or with no free slot will not benefit.

204-pin DDR3 SODIMM form factor decides fit

The module uses the 204-pin DDR3 SODIMM form factor required by compatible HP Envy 6 laptops. Only systems designed for this exact pin count and DDR3 electrical specification will accept the part. Verify the service manual before ordering.

Poudarki

  • Boost system responsiveness with a 4GB DDR3 1600 CL11 module
  • JEDEC-standard 1.5V design ensures a warranty-safe upgrade for HP Envy 6
  • Single 1Rx8 rank 204-pin SODIMM installs easily in compatible laptops
  • PC3-12800 speed rating matches factory specifications for reliable operation
  • Non-ECC unbuffered memory tested to meet or exceed OEM requirements

Specifikacije

BrandOWC
Part Number1S6D31R804GB
Capacity4GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 6 Series using DDR3 Memory

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What does the 1600 MHz speed mean once the module is installed in an HP Envy 6?

The module runs at 1600 MHz DDR3; actual data rate depends on the laptop's memory controller and whether one or two slots are populated.

What does the PC3-12800 label tell me about the interface and its practical limit?

PC3-12800 is the JEDEC DDR3-1600 standard; the laptop's chipset caps the usable bandwidth.

What physical slot and notch does this 204-pin SODIMM need to fit?

It requires a standard 204-pin DDR3 SODIMM socket with the key notch in the DDR3 position.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.