Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

OWC

OWC 4GB DDR3 1600 CL11 204-pin 1.5V laptop RAM

SKU CH-7AT5-Q0QXH

A 4 GB DDR3 1600 MHz SODIMM module with CL11 latency and 1.5 V operation for laptop, mini PC or NAS upgrades

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo

Capacity 4GB

  • Boosts responsiveness with a 4 GB DDR3 1600 MHz module
  • Meets JEDEC and RoHS standards for a warranty-safe upgrade
  • Simple DIY install fits most laptops and all-in-one systems
  • Runs at standard 1.5 V without ECC or buffering
  • Compatible with laptops, mini PCs and NAS devices

4GB DDR3 SODIMM for laptops and NAS

This module adds four gigabytes of DDR3 1600 memory to laptops, all-in-one PCs and compatible NAS units. It targets users who need a straightforward capacity increase without changing voltage or form factor. The 204-pin SO-DIMM fits standard DDR3 slots in those device classes.

JEDEC-compliant 1.5V unbuffered design

The stick follows JEDEC PC3-12800 timings at CL11 and runs at the standard 1.5 volts. Because it is non-ECC and unbuffered, it works in consumer platforms that do not support registered or error-correcting modules. RoHS compliance means the components meet restricted-substance rules.

Simple slot insertion with matching specs

Installation consists of aligning the notch on the 204-pin edge connector and pressing until the side clips engage. Most issues arise when the host system requires a different voltage, a higher density per rank, or an ECC module, so verifying the device manual before purchase avoids returns.

Priekšrocības

  • Boosts responsiveness with a 4 GB DDR3 1600 MHz module
  • Meets JEDEC and RoHS standards for a warranty-safe upgrade
  • Simple DIY install fits most laptops and all-in-one systems
  • Runs at standard 1.5 V without ECC or buffering
  • Compatible with laptops, mini PCs and NAS devices

Specifikācijas

BrandOWC
Part Number1S6D32R804GB
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
Recommend UseLaptops, All-in-One Systems, and NAS Systems

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the module need a heat spreader added later for sustained loads?

No heat spreader is included or required; the DDR3 1600 CL11 1.5V SODIMM runs within JEDEC thermal limits without one.

What limit appears first when the memory runs continuously at 1600 MHz?

The CL11 latency at 1.5V is the governing timing constraint under sustained DDR3 1600 operation.

How much heat and power does the 4 GB stick produce during all-day use?

At 1.5V the module draws minimal power and generates low heat typical for a non-ECC DDR3 1600 SODIMM.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.