Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V ECC UDIMM memory upgrade

SKU CH-NSPC-KMVFE

A 4 GB DDR3 ECC UDIMM module running at 1600 MHz with CL11 latency for compatible QNAP NAS systems

  • Capacity4GB
  • Type240-Pin DDR3 ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 5 V operation matches standard platform requirements
  • 240-pin UDIMM form factor fits listed QNAP NAS models
  • JEDEC compliance ensures reliable drop-in compatibility

4GB DDR3 ECC UDIMM for QNAP NAS

This single 4GB DDR3 1600 module adds ECC-protected memory to compatible QNAP TS-EC series rackmount NAS units. It installs in a standard 240-pin UDIMM slot and operates at 1.5V with CL11 latency. The unbuffered design suits the supported platforms without requiring registered DIMM support.

Replaces QNAP RAM-4GDR3EC-LD-1600

The module directly replaces the QNAP part number RAM-4GDR3EC-LD-1600 in the TS-EC1279U-RP, TS-EC1679U-RP, TS-EC1679U-SAS-RP and TS-EC879U-RP models. Upgrading is worthwhile when the existing capacity limits concurrent services or virtual machines. It does not suit systems that require registered memory or a different DDR generation.

Sustained operation with JEDEC compliance

Built to JEDEC and RoHS standards, the DIMM maintains stable timing during extended file serving or backup workloads. ECC corrects single-bit errors that can accumulate under continuous load. The lack of a heat spreader means airflow in the chassis must be adequate for passive cooling.

Priekšrocības

  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 5 V operation matches standard platform requirements
  • 240-pin UDIMM form factor fits listed QNAP NAS models
  • JEDEC compliance ensures reliable drop-in compatibility

Specifikācijas

BrandOWC
Part Number1E6D32R804GB
Capacity4GB
Type240-Pin DDR3 ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-EC1279U-RP
QNAP TS-EC1679U-RP
QNAP TS-EC1679U-SAS-RP
QNAP TS-EC879U-RP

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 240-pin DDR3 UDIMM fit the memory slots in a QNAP TS-EC1279U-RP?

Yes, the 240-pin DDR3 ECC UDIMM matches the slot and form factor required by the TS-EC1279U-RP and the other listed QNAP models.

What is the correct way to seat the module so the ECC UDIMM is fully recognised?

Align the notch with the slot key, press down evenly until both side clips click shut, then verify the full 4GB appears in the NAS firmware.

Does the 1.5V DDR3 1600 module need any firmware update or periodic re-seating to keep ECC working?

No firmware update is required; the JEDEC-standard 1.5V module runs without maintenance, and ECC operates continuously once the system reports the memory as healthy.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.