暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold contacts and black memory chips

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V ECC UDIMM memory upgrade

SKU CH-NSPC-KMVFE

A 4 GB DDR3 ECC UDIMM module running at 1600 MHz with CL11 latency for compatible QNAP NAS systems

  • Capacity4GB
  • Type240-Pin DDR3 ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes
  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 5 V operation matches standard platform requirements
  • 240-pin UDIMM form factor fits listed QNAP NAS models
  • JEDEC compliance ensures reliable drop-in compatibility

4GB DDR3 ECC UDIMM for QNAP NAS

This single 4GB DDR3 1600 module adds ECC-protected memory to compatible QNAP TS-EC series rackmount NAS units. It installs in a standard 240-pin UDIMM slot and operates at 1.5V with CL11 latency. The unbuffered design suits the supported platforms without requiring registered DIMM support.

Replaces QNAP RAM-4GDR3EC-LD-1600

The module directly replaces the QNAP part number RAM-4GDR3EC-LD-1600 in the TS-EC1279U-RP, TS-EC1679U-RP, TS-EC1679U-SAS-RP and TS-EC879U-RP models. Upgrading is worthwhile when the existing capacity limits concurrent services or virtual machines. It does not suit systems that require registered memory or a different DDR generation.

Sustained operation with JEDEC compliance

Built to JEDEC and RoHS standards, the DIMM maintains stable timing during extended file serving or backup workloads. ECC corrects single-bit errors that can accumulate under continuous load. The lack of a heat spreader means airflow in the chassis must be adequate for passive cooling.

特長

  • ECC protection guards data integrity for critical workloads
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 5 V operation matches standard platform requirements
  • 240-pin UDIMM form factor fits listed QNAP NAS models
  • JEDEC compliance ensures reliable drop-in compatibility

仕様

BrandOWC
Part Number1E6D32R804GB
Capacity4GB
Type240-Pin DDR3 ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemQNAP TS-EC1279U-RP
QNAP TS-EC1679U-RP
QNAP TS-EC1679U-SAS-RP
QNAP TS-EC879U-RP

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 240-pin DDR3 UDIMM fit the memory slots in a QNAP TS-EC1279U-RP?

Yes, the 240-pin DDR3 ECC UDIMM matches the slot and form factor required by the TS-EC1279U-RP and the other listed QNAP models.

What is the correct way to seat the module so the ECC UDIMM is fully recognised?

Align the notch with the slot key, press down evenly until both side clips click shut, then verify the full 4GB appears in the NAS firmware.

Does the 1.5V DDR3 1600 module need any firmware update or periodic re-seating to keep ECC working?

No firmware update is required; the JEDEC-standard 1.5V module runs without maintenance, and ECC operates continuously once the system reports the memory as healthy.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。