BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027877BTC
Krājumā
OWC
OWC 4GB DDR3L 1866 PC3L-14900 CL13 1Rx8 204-pin 1.35V Non-ECC SODIMM memory upgrade
4GB DDR3L 1866 SODIMM module upgrades compatible Synology NAS models DS218+, DS418play, DS620slim, DS718+ and DS918+
- Capacity4GB
- Type204-Pin DDR3L Non-ECC SODIMM
- SpeedDDR3L 1866 (PC3L 14900)
- CAS LatencyCL13
- Voltage1.35V
- ECCNo
- 4GB capacity expands NAS multitasking headroom
- DDR3L 1866 speed matches Synology DS218+, DS418play, DS620slim, DS718+, DS918+ specs
- 35V low-voltage DDR3L cuts power draw versus standard DDR3
- JEDEC-standard CL13 timing ensures warranty-safe compatibility
- 204-pin SODIMM form factor fits laptop, mini-PC and NAS slots
4GB DDR3L SODIMM for Synology NAS
This 4GB DDR3L 1866MHz CL13 module is built as a warranty-safe upgrade for specific Synology NAS models. It arrives as a single unbuffered 204-pin SODIMM rated at 1.35V without ECC or a heat spreader.
Fits DS218+ DS418play DS620slim DS718+ DS918+
The part matches Synology part number D3NS1866L-4G and is validated for the five listed NAS units. Systems that require ECC, registered modules, a different pin count or a different voltage cannot use this module.
JEDEC PC3L-14900 1.35V standard
JEDEC and RoHS compliance guarantees the electrical and mechanical specification the NAS firmware expects. The single decisive figure is the 1.35V DDR3L voltage; a 1.5V DDR3 stick will not operate correctly in these bays.
Priekšrocības
- 4GB capacity expands NAS multitasking headroom
- DDR3L 1866 speed matches Synology DS218+, DS418play, DS620slim, DS718+, DS918+ specs
- 35V low-voltage DDR3L cuts power draw versus standard DDR3
- JEDEC-standard CL13 timing ensures warranty-safe compatibility
- 204-pin SODIMM form factor fits laptop, mini-PC and NAS slots
Specifikācijas
| Brand | OWC |
|---|---|
| Part Number | 1S8T31R804GB |
| Capacity | 4GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | Synology NAS DS218+ Synology NAS DS418play Synology NAS DS620slim Synology NAS DS718+ Synology NAS DS918+ |
Jautājumi par šo preci
Which Synology NAS models is the 4GB DDR3L 1866 SODIMM compatible with?
The module is validated for the DS218+, DS418play, DS620slim, DS718+ and DS918+ NAS units.
Will the 1.35 V DDR3L stick work in a system that currently runs 1.5 V DDR3 memory?
Yes, DDR3L is backward-compatible with 1.5 V DDR3 slots; the module will operate at the lower 1.35 V.
How can I confirm the new 4GB module is recognised after installation?
Open the DSM Control Panel, choose Info Center and verify that total memory now shows the additional 4 GB.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
