Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with gold edge contacts and black memory chips

OWC

OWC 4GB DDR3L 1866 PC3L-14900 CL13 1Rx8 204-pin 1.35V Non-ECC SODIMM memory upgrade

SKU CH-EKJ4-7WT5W

4GB DDR3L 1866 SODIMM module upgrades compatible Synology NAS models DS218+, DS418play, DS620slim, DS718+ and DS918+

  • Capacity4GB
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCNo
  • 4GB capacity expands NAS multitasking headroom
  • DDR3L 1866 speed matches Synology DS218+, DS418play, DS620slim, DS718+, DS918+ specs
  • 35V low-voltage DDR3L cuts power draw versus standard DDR3
  • JEDEC-standard CL13 timing ensures warranty-safe compatibility
  • 204-pin SODIMM form factor fits laptop, mini-PC and NAS slots

4GB DDR3L SODIMM for Synology NAS

This 4GB DDR3L 1866MHz CL13 module is built as a warranty-safe upgrade for specific Synology NAS models. It arrives as a single unbuffered 204-pin SODIMM rated at 1.35V without ECC or a heat spreader.

Fits DS218+ DS418play DS620slim DS718+ DS918+

The part matches Synology part number D3NS1866L-4G and is validated for the five listed NAS units. Systems that require ECC, registered modules, a different pin count or a different voltage cannot use this module.

JEDEC PC3L-14900 1.35V standard

JEDEC and RoHS compliance guarantees the electrical and mechanical specification the NAS firmware expects. The single decisive figure is the 1.35V DDR3L voltage; a 1.5V DDR3 stick will not operate correctly in these bays.

Puncte forte

  • 4GB capacity expands NAS multitasking headroom
  • DDR3L 1866 speed matches Synology DS218+, DS418play, DS620slim, DS718+, DS918+ specs
  • 35V low-voltage DDR3L cuts power draw versus standard DDR3
  • JEDEC-standard CL13 timing ensures warranty-safe compatibility
  • 204-pin SODIMM form factor fits laptop, mini-PC and NAS slots

Specificații

BrandOWC
Part Number1S8T31R804GB
Capacity4GB
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS218+
Synology NAS DS418play
Synology NAS DS620slim
Synology NAS DS718+
Synology NAS DS918+

Întrebări despre acest articol

Which Synology NAS models is the 4GB DDR3L 1866 SODIMM compatible with?

The module is validated for the DS218+, DS418play, DS620slim, DS718+ and DS918+ NAS units.

Will the 1.35 V DDR3L stick work in a system that currently runs 1.5 V DDR3 memory?

Yes, DDR3L is backward-compatible with 1.5 V DDR3 slots; the module will operate at the lower 1.35 V.

How can I confirm the new 4GB module is recognised after installation?

Open the DSM Control Panel, choose Info Center and verify that total memory now shows the additional 4 GB.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.