Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR4 memory module with gold edge connector and black chips no heat spreader

OWC

OWC 4GB DDR4 2133 CL15 1Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TVS-882/882T

SKU CH-C30B-81DXZ

A 4GB DDR4 2133 CL15 UDIMM upgrade module for QNAP TVS-882 and TVS-882T NAS systems

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with a 4GB DDR4 2133 module
  • Low 1.2V draw keeps NAS running cool and efficient
  • CL15 latency speeds up everyday workloads
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Tested for QNAP TVS-882 and TVS-882T compatibility

QNAP TVS-882/882T DDR4 Upgrade

This OWC module adds 4 GB of DDR4-2133 memory to the QNAP TVS-882 and TVS-882T NAS units. It is a single 288-pin UDIMM rated at CL15 and 1.2 V, built to JEDEC PC4-17000 specifications. The stick is non-ECC, unbuffered and organised as 1Rx8 without a heat spreader.

Fits the TVS-882 series only

Buyers who need ECC error correction, registered DIMMs or a higher capacity per slot should look elsewhere. The module is validated solely for the two listed QNAP models and is not intended for other NAS brands, desktop motherboards or workstation platforms.

Slot-ready for the target NAS

Installation uses the existing UDIMM slots inside the TVS-882 or TVS-882T; no extra cables, brackets or power connections are required. Adding the module frees the CPU from memory pressure during multi-user file serving, virtualisation or media transcoding tasks.

Priekšrocības

  • Boosts multitasking with a 4GB DDR4 2133 module
  • Low 1.2V draw keeps NAS running cool and efficient
  • CL15 latency speeds up everyday workloads
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Tested for QNAP TVS-882 and TVS-882T compatibility

Specifikācijas

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TVS-882
QNAP TVS-882T

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does this 288-pin DDR4 UDIMM need a QNAP TVS-882 or TVS-882T NAS to operate?

Yes, the module is built to OWC part number 2U1D41R804GB and validated for QNAP TVS-882 and TVS-882T systems; it will not function in other platforms.

Can I keep my existing DDR4 2133 CL15 memory and add this 4GB stick alongside it?

The stick runs at 1.2V with CL15 timing and 1Rx8 organisation, matching the JEDEC DDR4-2133 standard used in the TVS-882/882T, so it will interleave with identical modules.

How do I confirm the NAS recognises the full 4GB after installation?

Power on the TVS-882 or TVS-882T, open the QTS control panel, go to System > Hardware and verify the total memory shows the previous amount plus 4GB.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.