Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular DDR4 memory module with gold edge connector and black chips no heat spreader

OWC

OWC 4GB DDR4 2133 CL15 1Rx8 288-pin 1.2V Non-ECC UDIMM for QNAP TVS-882/882T

SKU CH-C30B-81DXZ

A 4GB DDR4 2133 CL15 UDIMM upgrade module for QNAP TVS-882 and TVS-882T NAS systems

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with a 4GB DDR4 2133 module
  • Low 1.2V draw keeps NAS running cool and efficient
  • CL15 latency speeds up everyday workloads
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Tested for QNAP TVS-882 and TVS-882T compatibility

QNAP TVS-882/882T DDR4 Upgrade

This OWC module adds 4 GB of DDR4-2133 memory to the QNAP TVS-882 and TVS-882T NAS units. It is a single 288-pin UDIMM rated at CL15 and 1.2 V, built to JEDEC PC4-17000 specifications. The stick is non-ECC, unbuffered and organised as 1Rx8 without a heat spreader.

Fits the TVS-882 series only

Buyers who need ECC error correction, registered DIMMs or a higher capacity per slot should look elsewhere. The module is validated solely for the two listed QNAP models and is not intended for other NAS brands, desktop motherboards or workstation platforms.

Slot-ready for the target NAS

Installation uses the existing UDIMM slots inside the TVS-882 or TVS-882T; no extra cables, brackets or power connections are required. Adding the module frees the CPU from memory pressure during multi-user file serving, virtualisation or media transcoding tasks.

Helstu kostir

  • Boosts multitasking with a 4GB DDR4 2133 module
  • Low 1.2V draw keeps NAS running cool and efficient
  • CL15 latency speeds up everyday workloads
  • JEDEC and ROHS compliant for warranty-safe upgrades
  • Tested for QNAP TVS-882 and TVS-882T compatibility

Tæknilýsing

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemQNAP TVS-882
QNAP TVS-882T

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does this 288-pin DDR4 UDIMM need a QNAP TVS-882 or TVS-882T NAS to operate?

Yes, the module is built to OWC part number 2U1D41R804GB and validated for QNAP TVS-882 and TVS-882T systems; it will not function in other platforms.

Can I keep my existing DDR4 2133 CL15 memory and add this 4GB stick alongside it?

The stick runs at 1.2V with CL15 timing and 1Rx8 organisation, matching the JEDEC DDR4-2133 standard used in the TVS-882/882T, so it will interleave with identical modules.

How do I confirm the NAS recognises the full 4GB after installation?

Power on the TVS-882 or TVS-882T, open the QTS control panel, go to System > Hardware and verify the total memory shows the previous amount plus 4GB.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.