Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 4GB DDR4 2133MHz PC4-17000 CL15 1.2V 260pin SODIMM Dell OptiPlex 7040 Micro memory upgrade

SKU CH-1KVM-8X17S

4GB DDR4 SODIMM running at 2133MHz CL15 for the Dell OptiPlex 7040 Micro

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2133MHz speed
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 2V low voltage reduces power draw and heat
  • 260-pin SODIMM fits Dell OptiPlex 7040 Micro exactly
  • CL15 latency and 1Rx8 rank optimise data access

System-specific 4GB DDR4 SODIMM for Dell OptiPlex

This 260-pin DDR4 module delivers 4GB at 2133MHz with CL15 latency and 1.2V operation. It is validated for the Dell OptiPlex 7040 Micro and meets JEDEC PC4-17000 specifications. The unbuffered, non-ECC design suits the platform's memory controller directly.

Sustained multitasking stability

Under continuous workloads the module maintains its rated 2133MHz speed and CL15 timings without throttling, because it operates at the standard 1.2V JEDEC voltage. The 1Rx8 organisation provides consistent bandwidth for office applications, web browsing and light content creation. Compliance testing ensures error-free operation during extended sessions.

Verify single-slot capacity limit

Confirm the OptiPlex 7040 Micro accepts a 4GB SODIMM in its available slot and that the system BIOS recognises the full capacity. Ensure the existing memory is also DDR4 2133MHz non-ECC unbuffered; mixing generations or ECC types will prevent boot. The 260-pin form factor fits only DDR4 SO-DIMM sockets.

Priekšrocības

  • Boosts system responsiveness with 4GB DDR4 2133MHz speed
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 2V low voltage reduces power draw and heat
  • 260-pin SODIMM fits Dell OptiPlex 7040 Micro exactly
  • CL15 latency and 1Rx8 rank optimise data access

Specifikācijas

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7040 Micro

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much power does the 1.2V DDR4 module draw when the OptiPlex 7040 Micro runs continuously?

The module operates at the standard DDR4 voltage of 1.2V, keeping power draw low during all-day use in the Micro chassis.

Does the 260-pin SODIMM fit straight into the OptiPlex 7040 Micro without an adapter or extra parts?

Yes, the 260-pin DDR4 SODIMM is the native form factor for the OptiPlex 7040 Micro, so it installs directly into the memory slot.

Will this CL15 2133MHz stick work alongside the original memory already in my OptiPlex 7040 Micro?

It is built to JEDEC DDR4-2133 CL15 specs, so it will run at the same speed and timings as the factory-installed modules.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.