Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 4GB DDR4 2133MHz PC4-17000 CL15 1.2V 260pin SODIMM Dell OptiPlex 7040 Micro memory upgrade

SKU CH-1KVM-8X17S

4GB DDR4 SODIMM running at 2133MHz CL15 for the Dell OptiPlex 7040 Micro

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2133MHz speed
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 2V low voltage reduces power draw and heat
  • 260-pin SODIMM fits Dell OptiPlex 7040 Micro exactly
  • CL15 latency and 1Rx8 rank optimise data access

System-specific 4GB DDR4 SODIMM for Dell OptiPlex

This 260-pin DDR4 module delivers 4GB at 2133MHz with CL15 latency and 1.2V operation. It is validated for the Dell OptiPlex 7040 Micro and meets JEDEC PC4-17000 specifications. The unbuffered, non-ECC design suits the platform's memory controller directly.

Sustained multitasking stability

Under continuous workloads the module maintains its rated 2133MHz speed and CL15 timings without throttling, because it operates at the standard 1.2V JEDEC voltage. The 1Rx8 organisation provides consistent bandwidth for office applications, web browsing and light content creation. Compliance testing ensures error-free operation during extended sessions.

Verify single-slot capacity limit

Confirm the OptiPlex 7040 Micro accepts a 4GB SODIMM in its available slot and that the system BIOS recognises the full capacity. Ensure the existing memory is also DDR4 2133MHz non-ECC unbuffered; mixing generations or ECC types will prevent boot. The 260-pin form factor fits only DDR4 SO-DIMM sockets.

Přednosti

  • Boosts system responsiveness with 4GB DDR4 2133MHz speed
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • 2V low voltage reduces power draw and heat
  • 260-pin SODIMM fits Dell OptiPlex 7040 Micro exactly
  • CL15 latency and 1Rx8 rank optimise data access

Specifikace

BrandOWC
Part Number2S1D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7040 Micro

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much power does the 1.2V DDR4 module draw when the OptiPlex 7040 Micro runs continuously?

The module operates at the standard DDR4 voltage of 1.2V, keeping power draw low during all-day use in the Micro chassis.

Does the 260-pin SODIMM fit straight into the OptiPlex 7040 Micro without an adapter or extra parts?

Yes, the 260-pin DDR4 SODIMM is the native form factor for the OptiPlex 7040 Micro, so it installs directly into the memory slot.

Will this CL15 2133MHz stick work alongside the original memory already in my OptiPlex 7040 Micro?

It is built to JEDEC DDR4-2133 CL15 specs, so it will run at the same speed and timings as the factory-installed modules.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.