Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for Supermicro X8QB6 X8QBE

SKU CH-WAJW-04E38

ECC registered DDR3 module adds 8 GB at 1333 MHz CL9 for Supermicro X8QB6 and X8QBE servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes
  • ECC registered design protects data integrity in servers
  • 8 GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches system specifications
  • 5 V operation meets JEDEC standard requirements
  • 240-pin RDIMM form factor fits Supermicro X8QB6 and X8QBE motherboards

Compatible Server Memory Upgrade

This 8 GB DDR3 ECC Registered DIMM is built for Supermicro X8QB6 and X8QBE motherboards. It runs at 1333 MHz with CL9 latency and 1.5 V operation. The module uses a 2Rx4 organisation and a 240-pin interface. Error-correcting code and registered buffering target workstation and server stability.

Suited For Enterprise Upgrades

Administrators extending the life of qualified Supermicro platforms or building cost-sensitive replacement servers will find this module a direct fit. It cannot be mixed with unbuffered memory and will not operate in standard desktop boards. Buyers needing higher frequencies, greater densities or consumer-form-factor modules should look at other product lines.

Registered ECC With 2Rx4 Rank

The single specification that decides compatibility is the combination of registered ECC signalling and 2Rx4 rank on a 240-pin DDR3 1333 interface. Only motherboards that explicitly support this exact configuration will recognise the module and enable its error-correction features.

Priekšrocības

  • ECC registered design protects data integrity in servers
  • 8 GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches system specifications
  • 5 V operation meets JEDEC standard requirements
  • 240-pin RDIMM form factor fits Supermicro X8QB6 and X8QBE motherboards

Specifikācijas

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8QB6 Series
Supermicro Motherboard X8QBE Series

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this 2Rx4 ECC Registered DDR3-1333 RDIMM work alongside existing unbuffered DDR3 modules in my Supermicro X8QB6?

No — registered ECC RDIMMs cannot be mixed with unbuffered memory; all installed modules must be registered ECC for the system to operate correctly.

How can I confirm the 8 GB module is running at PC3-10600 CL9 after installation?

Check the BIOS memory information or use a tool such as CPU-Z; it should report DDR3-1333 speed, CL9 timings and 1.5 V operation for the new DIMM.

Does the single 8 GB stick ship with a heat spreader or any extra accessories I need to buy separately?

The module has no heat spreader and is sold as a single DIMM only; no cables, brackets or additional parts are included or required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.