Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green DDR3 RDIMM module with black chips and gold contacts

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for Supermicro X8QB6 X8QBE

SKU CH-WAJW-04E38

ECC registered DDR3 module adds 8 GB at 1333 MHz CL9 for Supermicro X8QB6 and X8QBE servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in servers
  • 8 GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches system specifications
  • 5 V operation meets JEDEC standard requirements
  • 240-pin RDIMM form factor fits Supermicro X8QB6 and X8QBE motherboards

Compatible Server Memory Upgrade

This 8 GB DDR3 ECC Registered DIMM is built for Supermicro X8QB6 and X8QBE motherboards. It runs at 1333 MHz with CL9 latency and 1.5 V operation. The module uses a 2Rx4 organisation and a 240-pin interface. Error-correcting code and registered buffering target workstation and server stability.

Suited For Enterprise Upgrades

Administrators extending the life of qualified Supermicro platforms or building cost-sensitive replacement servers will find this module a direct fit. It cannot be mixed with unbuffered memory and will not operate in standard desktop boards. Buyers needing higher frequencies, greater densities or consumer-form-factor modules should look at other product lines.

Registered ECC With 2Rx4 Rank

The single specification that decides compatibility is the combination of registered ECC signalling and 2Rx4 rank on a 240-pin DDR3 1333 interface. Only motherboards that explicitly support this exact configuration will recognise the module and enable its error-correction features.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 8 GB capacity expands memory for demanding workloads
  • DDR3 1333 CL9 timing matches system specifications
  • 5 V operation meets JEDEC standard requirements
  • 240-pin RDIMM form factor fits Supermicro X8QB6 and X8QBE motherboards

Tekniset tiedot

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8QB6 Series
Supermicro Motherboard X8QBE Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 2Rx4 ECC Registered DDR3-1333 RDIMM work alongside existing unbuffered DDR3 modules in my Supermicro X8QB6?

No — registered ECC RDIMMs cannot be mixed with unbuffered memory; all installed modules must be registered ECC for the system to operate correctly.

How can I confirm the 8 GB module is running at PC3-10600 CL9 after installation?

Check the BIOS memory information or use a tool such as CPU-Z; it should report DDR3-1333 speed, CL9 timings and 1.5 V operation for the new DIMM.

Does the single 8 GB stick ship with a heat spreader or any extra accessories I need to buy separately?

The module has no heat spreader and is sold as a single DIMM only; no cables, brackets or additional parts are included or required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.