Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 260pin SODIMM HP Envy 15-as memory upgrade

SKU CH-J9N1-H23QT

8GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, validated for HP Envy 15-as series laptops

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

HP Envy 15-as DDR4 SODIMM upgrade

This 8 GB DDR4 module is built for the HP Envy 15-as series, including the 15-as000ns, 15-as001na, 15-as001nf, 15-as001ng and 15-as001no models. It adds memory capacity to those specific laptops without requiring any configuration changes. Buyers with other notebook models or desktop systems cannot use this module.

260-pin unbuffered non-ECC build

The stick uses a standard 260-pin SO-DIMM edge connector with no heat spreader, so it fits the slim memory slots found in the listed Envy chassis. Unbuffered non-ECC organisation means it works directly with the laptop's consumer memory controller; there is no register or error-correction circuitry to interfere with the platform.

DDR4 2133 CL15 1.2 V limits

The JEDEC PC4-17000 rating sets the data rate at 2133 MT/s with a CAS latency of 15 at 1.2 V. Systems that only support lower DDR4 speeds will down-clock the module, while platforms needing higher bandwidth or lower latency will not reach those targets with this part.

Priekšrocības

  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

Specifikācijas

BrandOWC
Part Number2S1D42R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 15-as000ns
HP ENVY 15-as001na
HP ENVY 15-as001nf
HP ENVY 15-as001ng
HP ENVY 15-as001no

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the DDR4 2133MHz CL15 rating cap the memory speed at 2133MHz in my HP Envy 15-as?

Yes, this module runs at DDR4 2133 (PC4-17000) with CL15 timing; the laptop memory controller will not exceed that frequency.

What physical slot does the 260-pin SODIMM need to fit in the HP Envy 15-as series?

It requires a standard 260-pin DDR4 SODIMM slot; the Envy 15-as models listed use that exact form factor.

How do I install the module and which step do people often miss?

Power off, unplug, open the bottom panel, align the notch on the 260-pin edge connector, press firmly until the side clips click, then reassemble — the missed step is pressing hard enough to engage both clips.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.