Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips and gold edge connector

OWC

OWC 8GB DDR4 2133MHz CL15 1.2V 260pin SODIMM HP Envy 15-as memory upgrade

SKU CH-J9N1-H23QT

8GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, validated for HP Envy 15-as series laptops

  • Capacity8GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

HP Envy 15-as DDR4 SODIMM upgrade

This 8 GB DDR4 module is built for the HP Envy 15-as series, including the 15-as000ns, 15-as001na, 15-as001nf, 15-as001ng and 15-as001no models. It adds memory capacity to those specific laptops without requiring any configuration changes. Buyers with other notebook models or desktop systems cannot use this module.

260-pin unbuffered non-ECC build

The stick uses a standard 260-pin SO-DIMM edge connector with no heat spreader, so it fits the slim memory slots found in the listed Envy chassis. Unbuffered non-ECC organisation means it works directly with the laptop's consumer memory controller; there is no register or error-correction circuitry to interfere with the platform.

DDR4 2133 CL15 1.2 V limits

The JEDEC PC4-17000 rating sets the data rate at 2133 MT/s with a CAS latency of 15 at 1.2 V. Systems that only support lower DDR4 speeds will down-clock the module, while platforms needing higher bandwidth or lower latency will not reach those targets with this part.

Punti di forza

  • Boosts multitasking with 8GB DDR4 2133MHz CL15 memory
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Low 1.2V voltage reduces power draw and heat
  • 260-pin SODIMM fits HP Envy 15-as series laptops
  • Unbuffered non-ECC design ensures broad system compatibility

Caratteristiche tecniche

BrandOWC
Part Number2S1D42R808GB
Capacity8GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY 15-as000ns
HP ENVY 15-as001na
HP ENVY 15-as001nf
HP ENVY 15-as001ng
HP ENVY 15-as001no

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the DDR4 2133MHz CL15 rating cap the memory speed at 2133MHz in my HP Envy 15-as?

Yes, this module runs at DDR4 2133 (PC4-17000) with CL15 timing; the laptop memory controller will not exceed that frequency.

What physical slot does the 260-pin SODIMM need to fit in the HP Envy 15-as series?

It requires a standard 260-pin DDR4 SODIMM slot; the Envy 15-as models listed use that exact form factor.

How do I install the module and which step do people often miss?

Power off, unplug, open the bottom panel, align the notch on the 260-pin edge connector, press firmly until the side clips click, then reassemble — the missed step is pressing hard enough to engage both clips.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.