Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Three white 120 mm case fans with infinity mirror RGB lighting and rubber pads

PANO-MOUNTS

PANO-MOUNTS 120mm White Infinity Mirror RGB Case Fans 3-Pack

SKU CH-BZHR-JZCP2

Three 120 mm white fans with infinity-mirror RGB lighting, 35–40 CFM airflow, 20–25 dBA noise, 1600 RPM max and wireless remote control

  • Fan Size120mm
  • LEDRGB
  • TypeCase Fan
  • RPM<1600 RPM
  • Air Flow35-40 CFM
  • Noise Level20 - 25 dBA
  • Infinity mirror RGB creates a three-dimensional lighting effect
  • 20 to 25 dBA keeps the system whisper quiet
  • 35 to 40 CFM airflow cools components effectively
  • Wireless remote adjusts brightness and power without software
  • Three white 120 mm fans included for a coordinated build

Three-Pack Infinity Mirror Fans

The PANO-MOUNTS set contains three 120 mm white case fans with an infinite mirror design that layers RGB LEDs for a three-dimensional lighting effect. Each unit uses a 4-pin power connector and a 6-pin RGB interface for stable colour output. A wireless remote lets users switch the fans on or off and adjust LED brightness without software. The pack targets builders who want coordinated illumination across multiple intake or exhaust positions.

Screw Mount With Rubber Pads

Installation follows the standard 120 mm screw pattern; the 26 mm thickness fits most chassis fan bays. Noise-absorbing rubber pads are pre-fitted to each corner to dampen vibration against the case. The only common issue is routing the separate 6-pin RGB cables to a compatible header or hub, which can be tight in compact builds. No dedicated controller is included, so the remote becomes the sole lighting interface.

Steady Airflow At Low RPM

Under sustained load the fans spin below 1600 RPM and deliver 35 to 40 CFM while staying between 20 and 25 dBA. The rubber pads keep vibration noise consistent over long sessions rather than creeping up as bearings warm. Lighting remains stable because the 6-pin connection does not flicker when power draw fluctuates. The trio is not suited for high-static-pressure radiators or dense mesh filters that demand stronger static pressure.

Priekšrocības

  • Infinity mirror RGB creates a three-dimensional lighting effect
  • 20 to 25 dBA keeps the system whisper quiet
  • 35 to 40 CFM airflow cools components effectively
  • Wireless remote adjusts brightness and power without software
  • Three white 120 mm fans included for a coordinated build

Specifikācijas

BrandPANO-MOUNTS
Series4.72in/120mm
Part Number3
Fan Size120mm
LEDRGB
TypeCase Fan
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector4 Pin
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness26mm
FeaturesInfinite Mirror Design
Dimensions4.71×4.80×1.06in

Jautājumi par šo preci

How can I confirm the fans are running at the correct speed after installation?

Check the motherboard fan header or software monitoring; the fans should report up to 1600 RPM under load.

What comes in the 3-pack and do I need to buy a separate controller?

The box contains three 120 mm white fans with 4-pin power connectors and a wireless remote for RGB control; no separate controller is required.

Which version should I choose for a standard 120 mm case mounting?

This single 120 mm, 26 mm thick, 3-fan pack with 35–40 CFM airflow and 20–25 dBA noise fits standard case mounts.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.