Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three white 120 mm case fans with infinity mirror RGB lighting and rubber pads

PANO-MOUNTS

PANO-MOUNTS 120mm White Infinity Mirror RGB Case Fans 3-Pack

SKU CH-BZHR-JZCP2

Three 120 mm white fans with infinity-mirror RGB lighting, 35–40 CFM airflow, 20–25 dBA noise, 1600 RPM max and wireless remote control

  • Fan Size120mm
  • LEDRGB
  • TypeCase Fan
  • RPM<1600 RPM
  • Air Flow35-40 CFM
  • Noise Level20 - 25 dBA
  • Infinity mirror RGB creates a three-dimensional lighting effect
  • 20 to 25 dBA keeps the system whisper quiet
  • 35 to 40 CFM airflow cools components effectively
  • Wireless remote adjusts brightness and power without software
  • Three white 120 mm fans included for a coordinated build

Three-Pack Infinity Mirror Fans

The PANO-MOUNTS set contains three 120 mm white case fans with an infinite mirror design that layers RGB LEDs for a three-dimensional lighting effect. Each unit uses a 4-pin power connector and a 6-pin RGB interface for stable colour output. A wireless remote lets users switch the fans on or off and adjust LED brightness without software. The pack targets builders who want coordinated illumination across multiple intake or exhaust positions.

Screw Mount With Rubber Pads

Installation follows the standard 120 mm screw pattern; the 26 mm thickness fits most chassis fan bays. Noise-absorbing rubber pads are pre-fitted to each corner to dampen vibration against the case. The only common issue is routing the separate 6-pin RGB cables to a compatible header or hub, which can be tight in compact builds. No dedicated controller is included, so the remote becomes the sole lighting interface.

Steady Airflow At Low RPM

Under sustained load the fans spin below 1600 RPM and deliver 35 to 40 CFM while staying between 20 and 25 dBA. The rubber pads keep vibration noise consistent over long sessions rather than creeping up as bearings warm. Lighting remains stable because the 6-pin connection does not flicker when power draw fluctuates. The trio is not suited for high-static-pressure radiators or dense mesh filters that demand stronger static pressure.

Přednosti

  • Infinity mirror RGB creates a three-dimensional lighting effect
  • 20 to 25 dBA keeps the system whisper quiet
  • 35 to 40 CFM airflow cools components effectively
  • Wireless remote adjusts brightness and power without software
  • Three white 120 mm fans included for a coordinated build

Specifikace

BrandPANO-MOUNTS
Series4.72in/120mm
Part Number3
Fan Size120mm
LEDRGB
TypeCase Fan
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector4 Pin
ColorWhite
CompatibilityCase
Fan Counts3 Fans
Fan ControllerNo Controller
Fan Thickness26mm
FeaturesInfinite Mirror Design
Dimensions4.71×4.80×1.06in

Otázky k tomuto produktu

How can I confirm the fans are running at the correct speed after installation?

Check the motherboard fan header or software monitoring; the fans should report up to 1600 RPM under load.

What comes in the 3-pack and do I need to buy a separate controller?

The box contains three 120 mm white fans with 4-pin power connectors and a wireless remote for RGB control; no separate controller is required.

Which version should I choose for a standard 120 mm case mounting?

This single 120 mm, 26 mm thick, 3-fan pack with 35–40 CFM airflow and 20–25 dBA noise fits standard case mounts.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.