NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Peladn
Single-fan graphics card with 8 GB GDDR6 memory, 2506 CUDA cores and a 128-bit bus for 1080p gaming on a 70 W TDP
This Peladn graphics card uses the NVIDIA GeForce RTX 3050 GPU with 2506 CUDA cores and 8GB of GDDR6 memory on a 128-bit bus. The core clock runs at 1750 MHz and the board draws 70W TDP through a PCI Express 4.0 x16 slot. A single-fan cooler fits the 220mm length profile.
The card suits builders assembling a 1080p system on a modest power budget; the 500W PSU recommendation keeps cable requirements simple. DirectX 12 support covers current Windows titles. Users chasing high-refresh 1440p or GPU compute workloads should look at higher-tier models with more memory bandwidth.
The 128-bit memory interface is the specification that determines whether this board matches your workload; it caps memory throughput for texture-heavy scenes. If your engine streams large assets, a wider bus is required. Otherwise the 8GB GDDR6 buffer handles standard 1080p textures comfortably.
| Brand | PELADN |
|---|---|
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3050 |
| Core Clock | 1750 MHz |
| CUDA Cores | 2506 Cores |
| Effective Memory Clock | 1750 MHz |
| Memory Size | 8GB |
| Memory Interface | 128 bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| HDMI | 1 x HDMI |
| DisplayPort | 1 x DisplayPort |
| DVI | 1 x DVI |
| Cooler | Double Fans |
| Thermal Design Power | 70W |
| Recommended PSU Wattage | 500W |
The card measures 220 mm long, 112 mm tall and 44 mm thick, so verify your chassis has at least that much clearance for a dual-slot design.
Insert the card into a PCI Express 4.0 x16 slot, then connect one 8-pin cable from a 500 W or larger PSU; the connector must click home before the panel goes on.
Use compressed air every three to six months to clear dust from the two fans and fin stack, keeping the 70 W thermal load under control.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?