NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Peladn
Single-fan graphics card with 8 GB GDDR6 memory, 2506 CUDA cores and a 128-bit bus for 1080p gaming on a 70 W TDP
This Peladn graphics card uses the NVIDIA GeForce RTX 3050 GPU with 2506 CUDA cores and 8GB of GDDR6 memory on a 128-bit bus. The core clock runs at 1750 MHz and the board draws 70W TDP through a PCI Express 4.0 x16 slot. A single-fan cooler fits the 220mm length profile.
The card suits builders assembling a 1080p system on a modest power budget; the 500W PSU recommendation keeps cable requirements simple. DirectX 12 support covers current Windows titles. Users chasing high-refresh 1440p or GPU compute workloads should look at higher-tier models with more memory bandwidth.
The 128-bit memory interface is the specification that determines whether this board matches your workload; it caps memory throughput for texture-heavy scenes. If your engine streams large assets, a wider bus is required. Otherwise the 8GB GDDR6 buffer handles standard 1080p textures comfortably.
| Brand | PELADN |
|---|---|
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3050 |
| Core Clock | 1750 MHz |
| CUDA Cores | 2506 Cores |
| Effective Memory Clock | 1750 MHz |
| Memory Size | 8GB |
| Memory Interface | 128 bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| HDMI | 1 x HDMI |
| DisplayPort | 1 x DisplayPort |
| DVI | 1 x DVI |
| Cooler | Double Fans |
| Thermal Design Power | 70W |
| Recommended PSU Wattage | 500W |
The card measures 220 mm long, 112 mm tall and 44 mm thick, so verify your chassis has at least that much clearance for a dual-slot design.
Insert the card into a PCI Express 4.0 x16 slot, then connect one 8-pin cable from a 500 W or larger PSU; the connector must click home before the panel goes on.
Use compressed air every three to six months to clear dust from the two fans and fin stack, keeping the 70 W thermal load under control.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?