Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Perle INJ 1000 PoE injector, compact metal housing with two Ethernet ports

Perle

Perle INJ 1000 POE Injector 30W 2×10/100/1000Base-T

SKU CH-XET6-3RP9K

Delivers 30 W PoE+ over two 10/100/1000Base-T ports with IEEE 802.3at/af compliance and cULus safety listing

  • Delivers 30 W PoE+ power for demanding devices
  • Dual 10/100/1000Base-T ports simplify network cabling
  • IEEE 802.3at and 802.3af compliance ensures broad compatibility
  • cULus, cUL and UL listings confirm safety certification
  • Gigabit-speed data and power over a single cable

Perle INJ 1000 PoE Injector 30W

The Perle INJ 1000 delivers up to 30 watts of Power over Ethernet to compatible devices through a single cable run. It suits installers powering wireless access points, IP cameras or VoIP phones where mains sockets are unavailable. The unit complies with IEEE 802.3at and IEEE 802.3af standards for broad device compatibility. It is a new network accessory supplied in original packaging.

Thermals noise and power draw

The injector operates without a fan so it adds no audible noise to the installation site. Power consumption stays within the 30 watt PoE budget plus the injector's own overhead. The metal enclosure dissipates heat passively across its surface area. Normal use produces no measurable temperature rise in typical indoor environments.

Two gigabit Ethernet ports

Two 10/100/1000Base-T ports provide one data input and one PoE output for a single powered device. The injector does not switch or route traffic between multiple endpoints. Buyers needing to power several devices from one source should consider a multi-port PoE switch instead. The cULus, cUL and UL listings confirm compliance with North American safety requirements.

Priekšrocības

  • Delivers 30 W PoE+ power for demanding devices
  • Dual 10/100/1000Base-T ports simplify network cabling
  • IEEE 802.3at and 802.3af compliance ensures broad compatibility
  • cULus, cUL and UL listings confirm safety certification
  • Gigabit-speed data and power over a single cable

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How do I install the INJ 1000 POE injector and which step is often missed?

Connect the network cable to the data-in port, link the PoE-out port to the powered device, then plug in the mains supply; the step often missed is powering the injector before the Ethernet links are live.

What maintenance or replacement will the INJ 1000 POE injector need over time?

No user-serviceable parts exist; if the internal power supply fails the whole unit is replaced, and the cULus safety listings mean no periodic inspection is required.

What limit appears first when the INJ 1000 POE injector runs continuously at full load?

The 30 W PoE budget is the first ceiling; once a connected device draws the full 30 W the injector cannot supply more power even though the 10/100/1000 Mbps ports still pass data.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.