暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Perle INJ 1000 PoE injector, compact metal housing with two Ethernet ports

Perle

Perle INJ 1000 POE Injector 30W 2×10/100/1000Base-T

SKU CH-XET6-3RP9K

Delivers 30 W PoE+ over two 10/100/1000Base-T ports with IEEE 802.3at/af compliance and cULus safety listing

  • Delivers 30 W PoE+ power for demanding devices
  • Dual 10/100/1000Base-T ports simplify network cabling
  • IEEE 802.3at and 802.3af compliance ensures broad compatibility
  • cULus, cUL and UL listings confirm safety certification
  • Gigabit-speed data and power over a single cable

Perle INJ 1000 PoE Injector 30W

The Perle INJ 1000 delivers up to 30 watts of Power over Ethernet to compatible devices through a single cable run. It suits installers powering wireless access points, IP cameras or VoIP phones where mains sockets are unavailable. The unit complies with IEEE 802.3at and IEEE 802.3af standards for broad device compatibility. It is a new network accessory supplied in original packaging.

Thermals noise and power draw

The injector operates without a fan so it adds no audible noise to the installation site. Power consumption stays within the 30 watt PoE budget plus the injector's own overhead. The metal enclosure dissipates heat passively across its surface area. Normal use produces no measurable temperature rise in typical indoor environments.

Two gigabit Ethernet ports

Two 10/100/1000Base-T ports provide one data input and one PoE output for a single powered device. The injector does not switch or route traffic between multiple endpoints. Buyers needing to power several devices from one source should consider a multi-port PoE switch instead. The cULus, cUL and UL listings confirm compliance with North American safety requirements.

特長

  • Delivers 30 W PoE+ power for demanding devices
  • Dual 10/100/1000Base-T ports simplify network cabling
  • IEEE 802.3at and 802.3af compliance ensures broad compatibility
  • cULus, cUL and UL listings confirm safety certification
  • Gigabit-speed data and power over a single cable

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How do I install the INJ 1000 POE injector and which step is often missed?

Connect the network cable to the data-in port, link the PoE-out port to the powered device, then plug in the mains supply; the step often missed is powering the injector before the Ethernet links are live.

What maintenance or replacement will the INJ 1000 POE injector need over time?

No user-serviceable parts exist; if the internal power supply fails the whole unit is replaced, and the cULus safety listings mean no periodic inspection is required.

What limit appears first when the INJ 1000 POE injector runs continuously at full load?

The 30 W PoE budget is the first ceiling; once a connected device draws the full 30 W the injector cannot supply more power even though the 10/100/1000 Mbps ports still pass data.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。