Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Matte black brass rotary elbow fitting with G1/4 male and female threads, 30 degree angle

PrimoChill

PrimoChill Male Female G1/4 30 Degree Rotary Elbow Fitting TX Matte Black diy cooling

SKU CH-7TST-D0TW9

A coated-brass rotary elbow that redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option TX Matte Black

Skatīt vēl 10 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Redirect tubing at unconventional angles with 30-degree rotary elbow
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Male G1/4 and female G1/4 threads fit standard water-cooling components
  • Rotary function lets you aim the connection in any direction
  • Trusted US brand with 20 years of water-cooling experience

30 Degree Rotary Elbow

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting redirects tubing runs at a fixed 30 degree angle from the mount. Its rotary function lets you aim the connection in any direction to clear components. Coated brass construction provides durability for custom liquid cooling loops.

Suits tight routing needs

Builders who need a gentle directional change without sharp bends will find this adapter useful. It is not for loops that require a different fixed angle or a straight pass-through fitting. Buyers needing a swivel that rotates continuously under pressure should look elsewhere.

Male and Female G1/4 Threads

This fitting connects a male G1/4 thread on one side to a female G1/4 thread on the other. Verify that your blocks, radiators and other components use matching G1/4 ports before purchasing. The single fitting is supplied ready to install.

Priekšrocības

  • Redirect tubing at unconventional angles with 30-degree rotary elbow
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Male G1/4 and female G1/4 threads fit standard water-cooling components
  • Rotary function lets you aim the connection in any direction
  • Trusted US brand with 20 years of water-cooling experience

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the G1/4 threads on this 30-degree rotary elbow fit my existing water-cooling blocks and radiators?

Yes, it uses standard G1/4 male and female threads, the common size for most DIY water-cooling components.

How do I install the rotary elbow so it points the right way without leaking?

Hand-tighten the male thread into the component, then rotate the female end to the desired 30-degree angle before securing the tubing; the rotary joint lets you aim it without stressing the seal.

Does the coated brass material need any special care or replacement over time?

The coated brass resists corrosion in typical coolant loops; inspect the O-rings during routine maintenance and replace them if they show wear or hardening.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.