暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Matte black brass rotary elbow fitting with G1/4 male and female threads, 30 degree angle

PrimoChill

PrimoChill Male Female G1/4 30 Degree Rotary Elbow Fitting TX Matte Black diy cooling

SKU CH-7TST-D0TW9

A coated-brass rotary elbow that redirects tubing 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option TX Matte Black

他に 10点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Redirect tubing at unconventional angles with 30-degree rotary elbow
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Male G1/4 and female G1/4 threads fit standard water-cooling components
  • Rotary function lets you aim the connection in any direction
  • Trusted US brand with 20 years of water-cooling experience

30 Degree Rotary Elbow

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting redirects tubing runs at a fixed 30 degree angle from the mount. Its rotary function lets you aim the connection in any direction to clear components. Coated brass construction provides durability for custom liquid cooling loops.

Suits tight routing needs

Builders who need a gentle directional change without sharp bends will find this adapter useful. It is not for loops that require a different fixed angle or a straight pass-through fitting. Buyers needing a swivel that rotates continuously under pressure should look elsewhere.

Male and Female G1/4 Threads

This fitting connects a male G1/4 thread on one side to a female G1/4 thread on the other. Verify that your blocks, radiators and other components use matching G1/4 ports before purchasing. The single fitting is supplied ready to install.

特長

  • Redirect tubing at unconventional angles with 30-degree rotary elbow
  • Coated brass construction resists corrosion in liquid-cooling loops
  • Male G1/4 and female G1/4 threads fit standard water-cooling components
  • Rotary function lets you aim the connection in any direction
  • Trusted US brand with 20 years of water-cooling experience

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the G1/4 threads on this 30-degree rotary elbow fit my existing water-cooling blocks and radiators?

Yes, it uses standard G1/4 male and female threads, the common size for most DIY water-cooling components.

How do I install the rotary elbow so it points the right way without leaking?

Hand-tighten the male thread into the component, then rotate the female end to the desired 30-degree angle before securing the tubing; the rotary joint lets you aim it without stressing the seal.

Does the coated brass material need any special care or replacement over time?

The coated brass resists corrosion in typical coolant loops; inspect the O-rings during routine maintenance and replace them if they show wear or hardening.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。