暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Satin black brass rotary elbow fitting, 30 degree male to female G1/4 threads

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting Satin Black diy cooling

SKU CH-7SRT-WBB5E

Rotary elbow fitting redirects tubing runs 30 degrees from the mount with a male-to-female G1/4 thread and coated brass construction

  • TypeFittings

Option Satin Black

他に 10点の構成を表示

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

Redirecting Loop Runs

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting provides an easy solution for changing coolant direction quickly within a custom water-cooling loop. It redirects tubing runs away from components at unconventional angles. The rotary function allows the connection to be aimed in any desired direction 30 degrees from the mount.

Builders Needing Specific Angular Offsets

This fitting suits builders who need a precise 30-degree directional change combined with rotational alignment freedom. It is not for installers who require a different angular offset or a non-rotary rigid elbow. Loop designers needing straight couplers or parallel offsets must select alternative components.

30-Degree Rotary Angle

The defining specification is the fixed 30-degree bend angle paired with a rotary male G1/4 thread. This geometry determines whether the adapter can clear nearby components while aligning the female G1/4 port to the tubing run. Verify the angular requirement before purchase.

特長

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What thread standard does the G1/4 rotary elbow use and what does it connect to?

The fitting has a male G1/4 thread on one side and a female G1/4 thread on the other, so it joins any two G1/4 ports or components in a custom loop.

What clearance does the 30-degree elbow need to sit flush against a block or radiator?

The coated-brass body angles 30 degrees from the mount, so you only need enough space for the fitting’s own length plus the connected tubing bend radius.

How do I install the rotary elbow without stripping the threads?

Hand-tighten the male G1/4 end into the component first, then rotate the female collar to the desired angle before securing the tubing — do not force the rotary joint past its 30-degree limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。