Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Satin black brass rotary elbow fitting, 30 degree male to female G1/4 threads

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting Satin Black diy cooling

SKU CH-7SRT-WBB5E

Rotary elbow fitting redirects tubing runs 30 degrees from the mount with a male-to-female G1/4 thread and coated brass construction

  • TypeFittings

Option Satin Black

Rodyti 10 daugiau konfigūracijų

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

Redirecting Loop Runs

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting provides an easy solution for changing coolant direction quickly within a custom water-cooling loop. It redirects tubing runs away from components at unconventional angles. The rotary function allows the connection to be aimed in any desired direction 30 degrees from the mount.

Builders Needing Specific Angular Offsets

This fitting suits builders who need a precise 30-degree directional change combined with rotational alignment freedom. It is not for installers who require a different angular offset or a non-rotary rigid elbow. Loop designers needing straight couplers or parallel offsets must select alternative components.

30-Degree Rotary Angle

The defining specification is the fixed 30-degree bend angle paired with a rotary male G1/4 thread. This geometry determines whether the adapter can clear nearby components while aligning the female G1/4 port to the tubing run. Verify the angular requirement before purchase.

Privalumai

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

Specifikacijos

TypeFittings

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What thread standard does the G1/4 rotary elbow use and what does it connect to?

The fitting has a male G1/4 thread on one side and a female G1/4 thread on the other, so it joins any two G1/4 ports or components in a custom loop.

What clearance does the 30-degree elbow need to sit flush against a block or radiator?

The coated-brass body angles 30 degrees from the mount, so you only need enough space for the fitting’s own length plus the connected tubing bend radius.

How do I install the rotary elbow without stripping the threads?

Hand-tighten the male G1/4 end into the component first, then rotate the female collar to the desired angle before securing the tubing — do not force the rotary joint past its 30-degree limit.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.