Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Satin black brass rotary elbow fitting, 30 degree male to female G1/4 threads

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting Satin Black diy cooling

SKU CH-7SRT-WBB5E

Rotary elbow fitting redirects tubing runs 30 degrees from the mount with a male-to-female G1/4 thread and coated brass construction

  • TypeFittings

Option Satin Black

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

Redirecting Loop Runs

The PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting provides an easy solution for changing coolant direction quickly within a custom water-cooling loop. It redirects tubing runs away from components at unconventional angles. The rotary function allows the connection to be aimed in any desired direction 30 degrees from the mount.

Builders Needing Specific Angular Offsets

This fitting suits builders who need a precise 30-degree directional change combined with rotational alignment freedom. It is not for installers who require a different angular offset or a non-rotary rigid elbow. Loop designers needing straight couplers or parallel offsets must select alternative components.

30-Degree Rotary Angle

The defining specification is the fixed 30-degree bend angle paired with a rotary male G1/4 thread. This geometry determines whether the adapter can clear nearby components while aligning the female G1/4 port to the tubing run. Verify the angular requirement before purchase.

Přednosti

  • Redirects tubing runs at unconventional angles
  • Rotary function aims connection 30 degrees from mount
  • Male G1/4 and female G1/4 threads connect standard fittings
  • Coated brass construction resists corrosion
  • Trusted US brand with 20 years of water-cooling experience

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What thread standard does the G1/4 rotary elbow use and what does it connect to?

The fitting has a male G1/4 thread on one side and a female G1/4 thread on the other, so it joins any two G1/4 ports or components in a custom loop.

What clearance does the 30-degree elbow need to sit flush against a block or radiator?

The coated-brass body angles 30 degrees from the mount, so you only need enough space for the fitting’s own length plus the connected tubing bend radius.

How do I install the rotary elbow without stripping the threads?

Hand-tighten the male G1/4 end into the component first, then rotate the female collar to the desired angle before securing the tubing — do not force the rotary joint past its 30-degree limit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.