Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Brass rotary elbow fitting in True Blue, male to female G1/4, 30 degree angle

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting True Blue diy cooling

SKU CH-0XKH-S64CA

A coated-brass rotary elbow that redirects tubing 30 degrees with male and female G1/4 threads

  • TypeFittings

Option True Blue

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Quickly redirect tubing runs with a 30-degree rotary elbow
  • Rotary function lets you aim the connection in any direction
  • Coated brass construction resists corrosion in custom loops
  • Male and female G1/4 threads connect standard water-cooling components
  • Backed by a 20-year US brand focused on DIY cooling

30 Degree Rotary Elbow Fitting

The PrimoChill rotary elbow fitting redirects custom-loop tubing runs by thirty degrees from the mounting point. Its male-to-female G1/4 thread pattern fits standard water-cooling components. The rotary joint lets builders aim the connection in any orientation without stressing rigid or soft tubing. Coated brass construction resists corrosion in long-term liquid-cooling loops.

Coated Brass G1/4 Thread Adapter

The single fitting handles one directional change in a custom loop where space is tight or component clearance is awkward. It provides enough angular offset to route tubing around motherboard heatsinks, GPU backplates or reservoir ports. The thirty-degree bend is fixed; tighter or wider angles require different elbows or multiple fittings. Rotary action eases final alignment but does not replace a dedicated rotary union for continuous movement.

Upgrade From Rigid Elbow Fittings

Builders replacing fixed-angle elbows gain the ability to clock the outlet direction after the fitting is tightened, reducing the risk of stripped threads or kinked tubing. The improvement is worth it when the loop layout demands precise tubing entry angles that standard elbows cannot match. Loops that run straight runs or use only gentle curves will not benefit from the rotary feature.

Přednosti

  • Quickly redirect tubing runs with a 30-degree rotary elbow
  • Rotary function lets you aim the connection in any direction
  • Coated brass construction resists corrosion in custom loops
  • Male and female G1/4 threads connect standard water-cooling components
  • Backed by a 20-year US brand focused on DIY cooling

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 30-degree rotary elbow thread onto my existing G1/4 components without adapters?

Yes, it has a male G1/4 thread on one end and a female G1/4 thread on the other, so it connects directly to standard G1/4 ports and fittings.

How can I verify the rotary joint is seated correctly after installation?

The fitting should rotate freely through its 30-degree range without binding, and the coated brass body should show no gaps at the male or female threads when hand-tightened.

Does the package include any O-rings, tubing clamps or extra sealing washers?

The box contains only the single male-to-female 30-degree rotary elbow fitting; O-rings, clamps and additional washers must be purchased separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.