Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Brass rotary elbow fitting in True Blue, male to female G1/4, 30 degree angle

PrimoChill

PrimoChill Male to Female G1/4 30 Degree Rotary Elbow Fitting True Blue diy cooling

SKU CH-0XKH-S64CA

A coated-brass rotary elbow that redirects tubing 30 degrees with male and female G1/4 threads

  • TypeFittings

Option True Blue

Zobraziť ďalších 10 konfigurácií

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • Quickly redirect tubing runs with a 30-degree rotary elbow
  • Rotary function lets you aim the connection in any direction
  • Coated brass construction resists corrosion in custom loops
  • Male and female G1/4 threads connect standard water-cooling components
  • Backed by a 20-year US brand focused on DIY cooling

30 Degree Rotary Elbow Fitting

The PrimoChill rotary elbow fitting redirects custom-loop tubing runs by thirty degrees from the mounting point. Its male-to-female G1/4 thread pattern fits standard water-cooling components. The rotary joint lets builders aim the connection in any orientation without stressing rigid or soft tubing. Coated brass construction resists corrosion in long-term liquid-cooling loops.

Coated Brass G1/4 Thread Adapter

The single fitting handles one directional change in a custom loop where space is tight or component clearance is awkward. It provides enough angular offset to route tubing around motherboard heatsinks, GPU backplates or reservoir ports. The thirty-degree bend is fixed; tighter or wider angles require different elbows or multiple fittings. Rotary action eases final alignment but does not replace a dedicated rotary union for continuous movement.

Upgrade From Rigid Elbow Fittings

Builders replacing fixed-angle elbows gain the ability to clock the outlet direction after the fitting is tightened, reducing the risk of stripped threads or kinked tubing. The improvement is worth it when the loop layout demands precise tubing entry angles that standard elbows cannot match. Loops that run straight runs or use only gentle curves will not benefit from the rotary feature.

Prednosti

  • Quickly redirect tubing runs with a 30-degree rotary elbow
  • Rotary function lets you aim the connection in any direction
  • Coated brass construction resists corrosion in custom loops
  • Male and female G1/4 threads connect standard water-cooling components
  • Backed by a 20-year US brand focused on DIY cooling

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 30-degree rotary elbow thread onto my existing G1/4 components without adapters?

Yes, it has a male G1/4 thread on one end and a female G1/4 thread on the other, so it connects directly to standard G1/4 ports and fittings.

How can I verify the rotary joint is seated correctly after installation?

The fitting should rotate freely through its 30-degree range without binding, and the coated brass body should show no gaps at the male or female threads when hand-tightened.

Does the package include any O-rings, tubing clamps or extra sealing washers?

The box contains only the single male-to-female 30-degree rotary elbow fitting; O-rings, clamps and additional washers must be purchased separately.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.