Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver nickel rotary elbow fitting with male and female G 1/4 threads, 30 degree angle

PrimoChill

PrimoChill G1/4 30° Rotary Elbow Fitting Silver Nickel diy cooling

SKU CH-T6CA-GXB9C

A rotary elbow fitting redirects tubing runs 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Silver Nickel

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Redirects tubing runs at unconventional angles with a 30 degree offset
  • Rotary design lets you aim the connection in any direction
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Nickel-plated brass construction resists corrosion and looks clean
  • Backed by a 20 year US brand with domestic support

Fitting for Custom Loop Redirection

The PrimoChill G1/4 30° rotary elbow fitting connects a male G 1/4 thread to a female G 1/4 thread, letting builders redirect tubing runs by thirty degrees from the mount. Its rotary function allows the connection to be aimed in any desired direction without stressing the loop. The body is constructed from brass with a silver nickel finish for corrosion resistance. This single adapter suits DIY liquid-cooling assemblies where space or component layout demands an angled turn.

Suits Builders Needing Adjustable Angles

This fitting suits builders who need a shallow, adjustable bend to clear components such as graphics cards, motherboard heatsinks or reservoir ports. It is not for loops that require a sharp ninety-degree turn, a straight-through coupler, or a different thread standard such as NPT or metric sizes. The fixed thirty-degree offset cannot be altered to a tighter or wider angle, so planners needing variable geometry should look at alternative fitting types.

Male and Female G 1/4 Thread Specification

The decisive specification is the thread pairing: one male G 1/4 and one female G 1/4. Both ports must match this exact standard for the fitting to seal correctly in the loop. Verify every component in the circuit uses G 1/4 threads before purchasing, as mismatched threads will prevent assembly. The included package contains one rotary elbow fitting ready for installation.

Přednosti

  • Redirects tubing runs at unconventional angles with a 30 degree offset
  • Rotary design lets you aim the connection in any direction
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Nickel-plated brass construction resists corrosion and looks clean
  • Backed by a 20 year US brand with domestic support

Specifikace

TypeFittings

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose this 30° rotary elbow or a different angled fitting for my loop?

This fitting redirects tubing 30 degrees from the mount. Its rotary function lets you aim the connection in any direction at that fixed angle, unlike a rigid elbow.

What does the 30-degree angle mean once the fitting is installed in my loop?

The outlet sits 30 degrees off the mounting axis. You can rotate the fitting freely to point the tubing run exactly where you need it around components.

What thread standard does this G1/4 fitting use and what does it connect to?

It has a male G 1/4 thread on one side and a female G 1/4 thread on the other, so it joins any standard G 1/4 water-cooling component or tubing adapter.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.