Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Silver nickel rotary elbow fitting with male and female G 1/4 threads, 30 degree angle

PrimoChill

PrimoChill G1/4 30° Rotary Elbow Fitting Silver Nickel diy cooling

SKU CH-T6CA-GXB9C

A rotary elbow fitting redirects tubing runs 30 degrees from the mount with male and female G1/4 threads

  • TypeFittings

Option Silver Nickel

Visa 10 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • Redirects tubing runs at unconventional angles with a 30 degree offset
  • Rotary design lets you aim the connection in any direction
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Nickel-plated brass construction resists corrosion and looks clean
  • Backed by a 20 year US brand with domestic support

Fitting for Custom Loop Redirection

The PrimoChill G1/4 30° rotary elbow fitting connects a male G 1/4 thread to a female G 1/4 thread, letting builders redirect tubing runs by thirty degrees from the mount. Its rotary function allows the connection to be aimed in any desired direction without stressing the loop. The body is constructed from brass with a silver nickel finish for corrosion resistance. This single adapter suits DIY liquid-cooling assemblies where space or component layout demands an angled turn.

Suits Builders Needing Adjustable Angles

This fitting suits builders who need a shallow, adjustable bend to clear components such as graphics cards, motherboard heatsinks or reservoir ports. It is not for loops that require a sharp ninety-degree turn, a straight-through coupler, or a different thread standard such as NPT or metric sizes. The fixed thirty-degree offset cannot be altered to a tighter or wider angle, so planners needing variable geometry should look at alternative fitting types.

Male and Female G 1/4 Thread Specification

The decisive specification is the thread pairing: one male G 1/4 and one female G 1/4. Both ports must match this exact standard for the fitting to seal correctly in the loop. Verify every component in the circuit uses G 1/4 threads before purchasing, as mismatched threads will prevent assembly. The included package contains one rotary elbow fitting ready for installation.

I korthet

  • Redirects tubing runs at unconventional angles with a 30 degree offset
  • Rotary design lets you aim the connection in any direction
  • Male and female G 1/4 threads fit standard water-cooling loops
  • Nickel-plated brass construction resists corrosion and looks clean
  • Backed by a 20 year US brand with domestic support

Specifikationer

TypeFittings

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose this 30° rotary elbow or a different angled fitting for my loop?

This fitting redirects tubing 30 degrees from the mount. Its rotary function lets you aim the connection in any direction at that fixed angle, unlike a rigid elbow.

What does the 30-degree angle mean once the fitting is installed in my loop?

The outlet sits 30 degrees off the mounting axis. You can rotate the fitting freely to point the tubing run exactly where you need it around components.

What thread standard does this G1/4 fitting use and what does it connect to?

It has a male G 1/4 thread on one side and a female G 1/4 thread on the other, so it joins any standard G 1/4 water-cooling component or tubing adapter.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.