Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
UV pink coated brass 30 degree rotary elbow fitting G1/4 male to female

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting UV Pink

SKU CH-6JPQ-JMRPS

A G1/4 rotary elbow redirects tubing 30 degrees from the mount with male-to-female threads

  • TypeFittings

Option UV Pink

Visa 10 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Loop redirection fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting connects male to female G1/4 threads to redirect tubing runs by 30 degrees. Its rotary design lets builders aim the connection in any direction from the mount. Coated brass construction provides durability for custom water-cooling loops. The UV pink finish adds a distinctive visual accent.

Passive thermal profile

As a solid brass adapter with no moving parts, the fitting adds negligible thermal resistance to the loop. It draws zero power and produces no noise during operation. The rotary joint maintains a seal without requiring active cooling or lubrication. Flow restriction remains minimal compared to standard straight fittings.

Thirty-degree fixed offset

The elbow enforces a permanent 30 degree angle between the male and female ports, so the bend cannot be straightened or increased. Builders needing a different angle or a straight pass-through must choose another fitting type. The single G1/4 thread standard limits compatibility to matching components only.

I korthet

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Specifikationer

TypeFittings

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install the G1/4 rotary elbow fitting without stripping the threads?

Hand-tighten the male G1/4 thread into the component port, then use a soft-jaw wrench for a final quarter turn. The rotary joint lets you clock the 30-degree offset to any angle before locking it down.

What maintenance does the coated brass fitting need over time?

Inspect the UV pink coating annually for flaking or corrosion. If the finish degrades, replace the fitting to prevent particulate contamination in the loop.

At what temperature does the 30-degree rotary seal start to weep under sustained load?

The brass construction handles typical water-cooling temperatures well beyond normal operating ranges; no specific thermal limit for the rotary seal is published.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.