Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
UV pink coated brass 30 degree rotary elbow fitting G1/4 male to female

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting UV Pink

SKU CH-6JPQ-JMRPS

A G1/4 rotary elbow redirects tubing 30 degrees from the mount with male-to-female threads

  • TypeFittings

Option UV Pink

Vedeți celelalte 10 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Loop redirection fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting connects male to female G1/4 threads to redirect tubing runs by 30 degrees. Its rotary design lets builders aim the connection in any direction from the mount. Coated brass construction provides durability for custom water-cooling loops. The UV pink finish adds a distinctive visual accent.

Passive thermal profile

As a solid brass adapter with no moving parts, the fitting adds negligible thermal resistance to the loop. It draws zero power and produces no noise during operation. The rotary joint maintains a seal without requiring active cooling or lubrication. Flow restriction remains minimal compared to standard straight fittings.

Thirty-degree fixed offset

The elbow enforces a permanent 30 degree angle between the male and female ports, so the bend cannot be straightened or increased. Builders needing a different angle or a straight pass-through must choose another fitting type. The single G1/4 thread standard limits compatibility to matching components only.

Puncte forte

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the G1/4 rotary elbow fitting without stripping the threads?

Hand-tighten the male G1/4 thread into the component port, then use a soft-jaw wrench for a final quarter turn. The rotary joint lets you clock the 30-degree offset to any angle before locking it down.

What maintenance does the coated brass fitting need over time?

Inspect the UV pink coating annually for flaking or corrosion. If the finish degrades, replace the fitting to prevent particulate contamination in the loop.

At what temperature does the 30-degree rotary seal start to weep under sustained load?

The brass construction handles typical water-cooling temperatures well beyond normal operating ranges; no specific thermal limit for the rotary seal is published.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.