Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
UV pink coated brass 30 degree rotary elbow fitting G1/4 male to female

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting UV Pink

SKU CH-6JPQ-JMRPS

A G1/4 rotary elbow redirects tubing 30 degrees from the mount with male-to-female threads

  • TypeFittings

Option UV Pink

Vis 10 flere konfigurasjoner

Overstrøkne versjoner finnes, men er ikke på lager her.

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Loop redirection fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting connects male to female G1/4 threads to redirect tubing runs by 30 degrees. Its rotary design lets builders aim the connection in any direction from the mount. Coated brass construction provides durability for custom water-cooling loops. The UV pink finish adds a distinctive visual accent.

Passive thermal profile

As a solid brass adapter with no moving parts, the fitting adds negligible thermal resistance to the loop. It draws zero power and produces no noise during operation. The rotary joint maintains a seal without requiring active cooling or lubrication. Flow restriction remains minimal compared to standard straight fittings.

Thirty-degree fixed offset

The elbow enforces a permanent 30 degree angle between the male and female ports, so the bend cannot be straightened or increased. Builders needing a different angle or a straight pass-through must choose another fitting type. The single G1/4 thread standard limits compatibility to matching components only.

Høydepunkter

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Spesifikasjoner

TypeFittings

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How do I install the G1/4 rotary elbow fitting without stripping the threads?

Hand-tighten the male G1/4 thread into the component port, then use a soft-jaw wrench for a final quarter turn. The rotary joint lets you clock the 30-degree offset to any angle before locking it down.

What maintenance does the coated brass fitting need over time?

Inspect the UV pink coating annually for flaking or corrosion. If the finish degrades, replace the fitting to prevent particulate contamination in the loop.

At what temperature does the 30-degree rotary seal start to weep under sustained load?

The brass construction handles typical water-cooling temperatures well beyond normal operating ranges; no specific thermal limit for the rotary seal is published.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.