Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
UV pink coated brass 30 degree rotary elbow fitting G1/4 male to female

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting UV Pink

SKU CH-6JPQ-JMRPS

A G1/4 rotary elbow redirects tubing 30 degrees from the mount with male-to-female threads

  • TypeFittings

Option UV Pink

Sjá 10 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Loop redirection fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting connects male to female G1/4 threads to redirect tubing runs by 30 degrees. Its rotary design lets builders aim the connection in any direction from the mount. Coated brass construction provides durability for custom water-cooling loops. The UV pink finish adds a distinctive visual accent.

Passive thermal profile

As a solid brass adapter with no moving parts, the fitting adds negligible thermal resistance to the loop. It draws zero power and produces no noise during operation. The rotary joint maintains a seal without requiring active cooling or lubrication. Flow restriction remains minimal compared to standard straight fittings.

Thirty-degree fixed offset

The elbow enforces a permanent 30 degree angle between the male and female ports, so the bend cannot be straightened or increased. Builders needing a different angle or a straight pass-through must choose another fitting type. The single G1/4 thread standard limits compatibility to matching components only.

Helstu kostir

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the G1/4 rotary elbow fitting without stripping the threads?

Hand-tighten the male G1/4 thread into the component port, then use a soft-jaw wrench for a final quarter turn. The rotary joint lets you clock the 30-degree offset to any angle before locking it down.

What maintenance does the coated brass fitting need over time?

Inspect the UV pink coating annually for flaking or corrosion. If the finish degrades, replace the fitting to prevent particulate contamination in the loop.

At what temperature does the 30-degree rotary seal start to weep under sustained load?

The brass construction handles typical water-cooling temperatures well beyond normal operating ranges; no specific thermal limit for the rotary seal is published.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.