Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
UV pink coated brass 30 degree rotary elbow fitting G1/4 male to female

PrimoChill

PrimoChill G1/4 30 Degree Rotary Elbow Fitting UV Pink

SKU CH-6JPQ-JMRPS

A G1/4 rotary elbow redirects tubing 30 degrees from the mount with male-to-female threads

  • TypeFittings

Option UV Pink

Prikaži še 10 konfiguracij

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Loop redirection fitting

The PrimoChill G1/4 30 Degree Rotary Elbow Fitting connects male to female G1/4 threads to redirect tubing runs by 30 degrees. Its rotary design lets builders aim the connection in any direction from the mount. Coated brass construction provides durability for custom water-cooling loops. The UV pink finish adds a distinctive visual accent.

Passive thermal profile

As a solid brass adapter with no moving parts, the fitting adds negligible thermal resistance to the loop. It draws zero power and produces no noise during operation. The rotary joint maintains a seal without requiring active cooling or lubrication. Flow restriction remains minimal compared to standard straight fittings.

Thirty-degree fixed offset

The elbow enforces a permanent 30 degree angle between the male and female ports, so the bend cannot be straightened or increased. Builders needing a different angle or a straight pass-through must choose another fitting type. The single G1/4 thread standard limits compatibility to matching components only.

Poudarki

  • Quick directional changes in tight loops
  • 30 degree offset from the mount
  • Rotary joint aims the connection freely
  • Coated brass resists corrosion
  • US brand with 20 years experience

Specifikacije

TypeFittings

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How do I install the G1/4 rotary elbow fitting without stripping the threads?

Hand-tighten the male G1/4 thread into the component port, then use a soft-jaw wrench for a final quarter turn. The rotary joint lets you clock the 30-degree offset to any angle before locking it down.

What maintenance does the coated brass fitting need over time?

Inspect the UV pink coating annually for flaking or corrosion. If the finish degrades, replace the fitting to prevent particulate contamination in the loop.

At what temperature does the 30-degree rotary seal start to weep under sustained load?

The brass construction handles typical water-cooling temperatures well beyond normal operating ranges; no specific thermal limit for the rotary seal is published.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.