Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two small green circuit boards with castellated edges and USB connectors

Raspberry Pi

Raspberry Pi Pico 22AJ1097 RP2040 2MB Flash Pack of 2 development board

SKU CH-VW4V-04SGD

Dual-core ARM Cortex M0+ microcontroller board with 2MB flash, 26 GPIO pins, and drag-and-drop USB programming, two per pack

Name 2-pack

  • Dual-core Cortex M0+ runs up to 133 MHz for responsive real-time control
  • 2 MB on-board Flash stores code and data without external chips
  • 26 multi-function GPIO pins connect sensors, displays and actuators directly
  • Drag-and-drop USB mass-storage programming lets you start in seconds
  • Eight programmable I/O state machines create custom peripherals in hardware

Dual-core microcontroller for embedded projects

The Raspberry Pi Pico 22AJ1097 uses the RP2040 chip with two ARM Cortex M0+ cores running up to 133 MHz. Each board provides 264kB of SRAM and 2MB of on-board Flash memory. This pack of two suits hobbyists, students and engineers building custom IoT edge devices or learning microcontroller programming in C or MicroPython.

Low-power operation with minimal heat

The RP2040 draws very little current and includes sleep and dormant modes for battery-powered designs. No active cooling is required during normal use, so the boards run silently. Power is supplied over the USB 1.1 port, which also handles drag-and-drop programming via mass storage.

Castellated edges and rich I/O for integration

Each module has castellated pads for direct soldering to carrier boards. You get 26 multi-function GPIO pins, two SPI, two I2C, two UART, three 12-bit ADC channels and 16 PWM channels. Eight Programmable I/O state machines allow custom peripheral support, while an on-chip temperature sensor and accelerated floating-point libraries expand application possibilities.

Priekšrocības

  • Dual-core Cortex M0+ runs up to 133 MHz for responsive real-time control
  • 2 MB on-board Flash stores code and data without external chips
  • 26 multi-function GPIO pins connect sensors, displays and actuators directly
  • Drag-and-drop USB mass-storage programming lets you start in seconds
  • Eight programmable I/O state machines create custom peripherals in hardware

Specifikācijas

BrandRaspberry Pi
Model22AJ1097
Part Number22AJ1097

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the Pico on a carrier board and which orientation step do people get wrong?

Align the castellated edges with the carrier-board pads and solder each pad; the USB connector must face the board edge so the micro-USB port remains accessible after mounting.

What maintenance will the on-board 2MB Flash need over time?

The Flash is non-volatile and requires no scheduled maintenance; firmware updates are applied by dragging a new UF2 file onto the mass-storage device that appears when the board is plugged in.

What limit appears first when both Cortex-M0+ cores run continuously at 133 MHz?

The 264kB SRAM fills before the Flash or GPIO bandwidth, so sustained dual-core workloads must fit code and data within that memory space.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.