Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Gold aluminium USB-C enclosure for M.2 NVMe SSD

Sabrent

Sabrent EC-NVME-GLD Gold M.2 NVMe USB 3.1 drive enclosure

SKU CH-2N0E-BCRJJ

Gold aluminium enclosure turns an M.2 NVMe SSD into a USB 3.1 Gen2 portable drive at up to 10Gbps

  • ColorGold
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB 3.1
  • USB 3.1 Gen2 delivers up to 10Gbps transfer speed
  • Tool-free hot-swap design works instantly with no driver needed
  • Aluminium alloy shell with vents dissipates heat from NVMe drives
  • Supports M-key NVMe SSDs in 2230 2242 2260 2280 form factors
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 ports

Target Drive Type

This enclosure accepts only NVMe M-key M.2 SSDs in the 2230, 2242, 2260 and 2280 form factors. It does not support M.2 SATA-based drives, so buyers with NGFF modules must choose a different adapter.

Deciding Specification

The external interface is USB 3.1 Gen2 with a 10Gbps signalling rate. That single figure determines whether the enclosure can saturate your NVMe SSD or whether the link becomes the bottleneck.

Sustained Behaviour

An aluminum shell with venting acts as a heatsink to move heat away from the drive during long transfers. The design aims to keep performance stable rather than throttling after a short burst.

Priekšrocības

  • USB 3.1 Gen2 delivers up to 10Gbps transfer speed
  • Tool-free hot-swap design works instantly with no driver needed
  • Aluminium alloy shell with vents dissipates heat from NVMe drives
  • Supports M-key NVMe SSDs in 2230 2242 2260 2280 form factors
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 ports

Specifikācijas

BrandSABRENT
ModelEC-NVME-GLD
ColorGold
SizeM.2
TypeEnclosure
MaterialAluminum
External InterfaceUSB 3.1

Jautājumi par šo preci

What real-world read and write speeds can I expect when the enclosure is connected to a USB 3.1 Gen 2 port?

The enclosure pushes USB 3.1 Gen 2 to its limit, delivering sequential read and write speeds between 850 and 1020 MB/s with most NVMe SSDs.

Which USB standard does the Type-C port use and what is its maximum throughput?

The port uses USB 3.1 Gen 2, providing up to 10 Gbps of bandwidth, and is backward compatible with USB 3.1 Gen 1 and USB 3.0.

What M.2 SSD lengths and keying does the enclosure accept?

It supports M-key NVMe drives in 2230, 2242, 2260 and 2280 form factors; SATA-based M.2 SSDs are not supported.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.