Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gold aluminium USB-C enclosure for M.2 NVMe SSD

Sabrent

Sabrent EC-NVME-GLD Gold M.2 NVMe USB 3.1 drive enclosure

SKU CH-2N0E-BCRJJ

Gold aluminium enclosure turns an M.2 NVMe SSD into a USB 3.1 Gen2 portable drive at up to 10Gbps

  • ColorGold
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum
  • External InterfaceUSB 3.1
  • USB 3.1 Gen2 delivers up to 10Gbps transfer speed
  • Tool-free hot-swap design works instantly with no driver needed
  • Aluminium alloy shell with vents dissipates heat from NVMe drives
  • Supports M-key NVMe SSDs in 2230 2242 2260 2280 form factors
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 ports

Target Drive Type

This enclosure accepts only NVMe M-key M.2 SSDs in the 2230, 2242, 2260 and 2280 form factors. It does not support M.2 SATA-based drives, so buyers with NGFF modules must choose a different adapter.

Deciding Specification

The external interface is USB 3.1 Gen2 with a 10Gbps signalling rate. That single figure determines whether the enclosure can saturate your NVMe SSD or whether the link becomes the bottleneck.

Sustained Behaviour

An aluminum shell with venting acts as a heatsink to move heat away from the drive during long transfers. The design aims to keep performance stable rather than throttling after a short burst.

Kohokohdat

  • USB 3.1 Gen2 delivers up to 10Gbps transfer speed
  • Tool-free hot-swap design works instantly with no driver needed
  • Aluminium alloy shell with vents dissipates heat from NVMe drives
  • Supports M-key NVMe SSDs in 2230 2242 2260 2280 form factors
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 ports

Tekniset tiedot

BrandSABRENT
ModelEC-NVME-GLD
ColorGold
SizeM.2
TypeEnclosure
MaterialAluminum
External InterfaceUSB 3.1

Kysymyksiä tästä tuotteesta

What real-world read and write speeds can I expect when the enclosure is connected to a USB 3.1 Gen 2 port?

The enclosure pushes USB 3.1 Gen 2 to its limit, delivering sequential read and write speeds between 850 and 1020 MB/s with most NVMe SSDs.

Which USB standard does the Type-C port use and what is its maximum throughput?

The port uses USB 3.1 Gen 2, providing up to 10 Gbps of bandwidth, and is backward compatible with USB 3.1 Gen 1 and USB 3.0.

What M.2 SSD lengths and keying does the enclosure accept?

It supports M-key NVMe drives in 2230, 2242, 2260 and 2280 form factors; SATA-based M.2 SSDs are not supported.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.