Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact USB 2.0 to RJ45 network adapter in black plastic with status LEDs

sakose

sakose USB 2.0 to RJ45 network card 10/100 Mbps

SKU CH-65Y6-F29RS

Adds a 10/100 Mbps wired Ethernet port via USB 2.0 for legacy and modern systems

  • Adds wired Ethernet to any USB 2.0 port
  • Runs at 10 or 100 Mbps full duplex
  • Works with Windows 98SE through Win 8 plus Linux and MacOS
  • LED indicators show power link and 100 Mbps speed
  • Meets CE FCC ICES VCCI Class B emissions standards

USB 2.0 Ethernet adapter for basic networking

This USB 2.0 to RJ45 adapter adds a 10/100 Mbps wired connection to computers that lack an onboard Ethernet port. It draws power from the USB bus and supports Windows 98SE through Windows 8, Linux and MacOS. The device suits small offices, home offices and mobile users who need simple file, printer or Internet sharing.

Sustained throughput limited by USB 2.0 bandwidth

The adapter conforms to IEEE802.3 and IEEE802.3u standards, delivering 10Base-T at 20 Mbps full duplex and 100Base-TX at 200 Mbps full duplex on the wire. Because the host link is USB 2.0, actual sustained transfer tops out at 100 Mbps. It operates reliably from 0 °C to 45 °C at 10–90 % humidity with no condensation.

100 Mbps ceiling decides fit for purpose

The single specification that determines suitability is the 100 Mbps maximum transfer rate over USB 2.0. Buyers who need gigabit or multi-gigabit throughput cannot use this adapter. It is not for systems without a USB 1.1 or 2.0 port, nor for environments hotter than 45 °C.

Priekšrocības

  • Adds wired Ethernet to any USB 2.0 port
  • Runs at 10 or 100 Mbps full duplex
  • Works with Windows 98SE through Win 8 plus Linux and MacOS
  • LED indicators show power link and 100 Mbps speed
  • Meets CE FCC ICES VCCI Class B emissions standards

Specifikācijas

BrandSAKOSE

Jautājumi par šo preci

How much heat or power does the adapter draw when running all day?

The adapter uses USB bus power and operates between 0 °C and 45 °C with 10–90 % humidity, so it stays cool during continuous use.

What must I already own for this adapter to work?

You need a device with a USB 1.1 or USB 2.0 port running Windows 98SE, Me, 2000, XP, Vista 32-bit, Win7 32-bit, CE 5.0/6.0, Linux, MacOS or Win 8.

Will the 10/100 Mbps RJ-45 port slow down my older 10Base-T hub?

No, the adapter auto-negotiates 10 or 100 Mbps full duplex and complies with IEEE 802.3 and 802.3u, so it works with legacy 10Base-T equipment.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.