Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact USB 2.0 to RJ45 network adapter in black plastic with status LEDs

sakose

sakose USB 2.0 to RJ45 network card 10/100 Mbps

SKU CH-65Y6-F29RS

Adds a 10/100 Mbps wired Ethernet port via USB 2.0 for legacy and modern systems

  • Adds wired Ethernet to any USB 2.0 port
  • Runs at 10 or 100 Mbps full duplex
  • Works with Windows 98SE through Win 8 plus Linux and MacOS
  • LED indicators show power link and 100 Mbps speed
  • Meets CE FCC ICES VCCI Class B emissions standards

USB 2.0 Ethernet adapter for basic networking

This USB 2.0 to RJ45 adapter adds a 10/100 Mbps wired connection to computers that lack an onboard Ethernet port. It draws power from the USB bus and supports Windows 98SE through Windows 8, Linux and MacOS. The device suits small offices, home offices and mobile users who need simple file, printer or Internet sharing.

Sustained throughput limited by USB 2.0 bandwidth

The adapter conforms to IEEE802.3 and IEEE802.3u standards, delivering 10Base-T at 20 Mbps full duplex and 100Base-TX at 200 Mbps full duplex on the wire. Because the host link is USB 2.0, actual sustained transfer tops out at 100 Mbps. It operates reliably from 0 °C to 45 °C at 10–90 % humidity with no condensation.

100 Mbps ceiling decides fit for purpose

The single specification that determines suitability is the 100 Mbps maximum transfer rate over USB 2.0. Buyers who need gigabit or multi-gigabit throughput cannot use this adapter. It is not for systems without a USB 1.1 or 2.0 port, nor for environments hotter than 45 °C.

Kohokohdat

  • Adds wired Ethernet to any USB 2.0 port
  • Runs at 10 or 100 Mbps full duplex
  • Works with Windows 98SE through Win 8 plus Linux and MacOS
  • LED indicators show power link and 100 Mbps speed
  • Meets CE FCC ICES VCCI Class B emissions standards

Tekniset tiedot

BrandSAKOSE

Kysymyksiä tästä tuotteesta

How much heat or power does the adapter draw when running all day?

The adapter uses USB bus power and operates between 0 °C and 45 °C with 10–90 % humidity, so it stays cool during continuous use.

What must I already own for this adapter to work?

You need a device with a USB 1.1 or USB 2.0 port running Windows 98SE, Me, 2000, XP, Vista 32-bit, Win7 32-bit, CE 5.0/6.0, Linux, MacOS or Win 8.

Will the 10/100 Mbps RJ-45 port slow down my older 10Base-T hub?

No, the adapter auto-negotiates 10 or 100 Mbps full duplex and complies with IEEE 802.3 and 802.3u, so it works with legacy 10Base-T equipment.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.