NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Samsung Canada
16 GB DDR3 1866 ECC registered DIMM with CL13 latency and 1.5 V operation
This Samsung M393B2G70DB0-CMA module provides 16GB of DDR3 server memory operating at 1866 MT/s with a CAS latency of CL13. It uses a 2Rx4 registered design with ECC Chipkill error correction and runs at the standard 1.5V. The single 240-pin DIMM is sold new without a heat spreader.
This module fits systems that require registered DIMMs with Chipkill ECC and a 2Rx4 organisation at the DDR3-1866 speed grade. It is not for platforms that accept only unbuffered non-ECC UDIMMs or that require a different DDR generation, voltage, pin count or rank configuration.
The registered buffer and Chipkill ECC are mandatory for compatible chipsets; unbuffered or standard ECC modules will not work in the same slots. Verify that your server specifies registered DDR3-1866 RDIMMs with a 2Rx4 layout before purchasing.
| Brand | SAMSUNG |
|---|---|
| Model | M393B2G70DB0-CMA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | ECC Chipkill |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
| Sūtījuma svars | 0.23 kg |
| Sūtījuma izmēri | 229 × 152 × 25 mm |
The module operates at the standard DDR3 voltage of 1.50 V and the rated speed of 1866 MHz; registered DIMMs of this class typically draw a few watts per stick and run warm but within normal server thermal limits.
A 240-pin DDR3 DIMM slot that supports registered ECC memory is required; the board must accept 2Rx4 modules and provide the PC3-14900 data rate.
Mixing ranks is generally supported on server platforms that qualify 2Rx4 modules; the memory controller will address each rank independently at the common 1866 MHz speed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?