NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Samsung Canada
16 GB DDR3 1866 ECC registered DIMM with CL13 latency and 1.5 V operation
This Samsung M393B2G70DB0-CMA module provides 16GB of DDR3 server memory operating at 1866 MT/s with a CAS latency of CL13. It uses a 2Rx4 registered design with ECC Chipkill error correction and runs at the standard 1.5V. The single 240-pin DIMM is sold new without a heat spreader.
This module fits systems that require registered DIMMs with Chipkill ECC and a 2Rx4 organisation at the DDR3-1866 speed grade. It is not for platforms that accept only unbuffered non-ECC UDIMMs or that require a different DDR generation, voltage, pin count or rank configuration.
The registered buffer and Chipkill ECC are mandatory for compatible chipsets; unbuffered or standard ECC modules will not work in the same slots. Verify that your server specifies registered DDR3-1866 RDIMMs with a 2Rx4 layout before purchasing.
| Brand | SAMSUNG |
|---|---|
| Model | M393B2G70DB0-CMA |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | ECC Chipkill |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Samsung Chipset |
| Heat Spreader | No |
| Lähetyspaino | 0.23 kg |
| Pakkauksen mitat | 229 × 152 × 25 mm |
The module operates at the standard DDR3 voltage of 1.50 V and the rated speed of 1866 MHz; registered DIMMs of this class typically draw a few watts per stick and run warm but within normal server thermal limits.
A 240-pin DDR3 DIMM slot that supports registered ECC memory is required; the board must accept 2Rx4 modules and provide the PC3-14900 data rate.
Mixing ranks is generally supported on server platforms that qualify 2Rx4 modules; the memory controller will address each rank independently at the common 1866 MHz speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?