Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 184-pin DDR SDRAM module with black memory chips, no heat spreader

SAMSUNG

SAMSUNG M368L3223FTN-CCC 256MB DDR 400 PC3200 CL3 184-Pin memory upgrade

SKU CH-GZRN-TBP3M MPN M368L3223FTN-CCC

256 MB DDR 400 PC3200 CL3 184-pin module upgrades compatible legacy systems with Samsung Original reliability

  • Capacity256MB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • Heat SpreaderNo
  • 256MB capacity supports legacy system upgrades
  • DDR 400 speed matches PC3200 specification
  • CL3 latency delivers responsive memory timing
  • 184-pin DDR SDRAM fits compatible desktop slots
  • 60V operation suits period-correct hardware

256 MB DDR 400 CL3 System Memory

This 256 MB DDR 400 (PC 3200) module uses 184-pin DDR SDRAM with CL3 latency and 2.60 V operation. It is a new Samsung Original part built for systems that require this exact specification.

Suits legacy DDR 400 platforms needing a single

Buyers who want more storage, higher speed grades, lower CAS latency, heat spreaders or larger capacities should look at something else. Motherboards limited to SDR memory or different pin counts will not accept this module.

184-pin DDR SDRAM form factor

The 184-pin DDR interface is the single specification that decides whether this is the right part; the board must physically and electrically support 184-pin DDR SDRAM at DDR 400.

Priekšrocības

  • 256MB capacity supports legacy system upgrades
  • DDR 400 speed matches PC3200 specification
  • CL3 latency delivers responsive memory timing
  • 184-pin DDR SDRAM fits compatible desktop slots
  • 60V operation suits period-correct hardware

Specifikācijas

BrandSAMSUNG
SeriesOriginal
ModelM368L3223FTN-CCC
Capacity256MB
Type184-Pin DDR SDRAM
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
Heat SpreaderNo
Sūtījuma svars0.14 kg
Sūtījuma izmēri140 × 51 × 13 mm

Jautājumi par šo preci

How much power does this 2.60 V DDR 400 module draw when the system runs all day?

The module operates at 2.60 V, the standard voltage for DDR 400 SDRAM. Power draw scales with capacity and bus activity; a 256 MB stick at this voltage typically draws a few watts under load.

What motherboard slot is required to install this 184-pin DDR SDRAM?

A desktop motherboard with an 184-pin DDR DIMM slot keyed for 2.60 V DDR 400 (PC 3200) memory is required.

Will this CL3 256 MB module work in a system that already has PC 3200 memory installed?

Yes, it is a PC 3200 (DDR 400) module with CL3 latency. The memory controller will run all installed DDR 400 sticks at the slowest common timings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.